KV-S4065CL, KV-S4065CW, KV-S4085CL, KV-S4085CW - Panasonic Other Service Manuals Service Manual Supplement (repair manual). Page 11

11

Test

LED

Used to periodically light the indicators on the front cover 

5

Key / Sensor

Used to do keys' or sensors' ON/OFF test

5

Sensor Sensitive Level

Used to check the status (Offset level, Slice level) of each Sensor
(Waiting, Starting, Skew (L), Skew (R), Exit, Paper Jam)

5

Feed Motor

Used to check Paper Feed Motor and Separation Motor rotation

5

Conveyor Motor

Used to check Conveyor Motor rotation

5

DFP Pressure Drive

Used to check DFP Pressure Motor rotation

5

Hopper Drive

Used to check Hopper Motor rotation

5

Feed

Used to check paper feed condition

5

Slip Detect Sensor

Used to check Slip Detect Sensors (1,2) and their rollers
mechanism 

5

Sleep Mode

1. Used to check whether the sleep mode function works properly

5

CIS Level

Used to check the peak output-level after setting CIS LED lighting
level on each side

5

CIS Focus

Used to check whether the CIS focus point is appropriate to scan
documents, and used to adjust the focus, showing the CIS gray
density level on the display

4,5

Image Sensor Output

Used to check whether CIS operates normally by outputting the
CIS's output level or whether a dust is attached on the Image
Sensor Cover

5

Double Feed

1. For KV-S4085CL/ CW Series
   Used to check the levels of the Double Feed Detector L(R),
   C(R), and R(R) (Response level) after setting the ultrasonic
   emission level of the Double Feed Detectors L(G), C(G),
   and R(G

)

2. For KV-S4065CL/CW Series
 Used to check the level of the Double Feed Detector (R)
 (Response level) after setting the ultrasonic emission level of the
 Double Feed Detector (G)

5

Memory

Used to execute memory R/W test

5

Roller Pressure Sensor Level 

Used to check the level of the pressure exerted by the Hopper 

2

Adjust

Shading

Used to execute shading correction

4

All Position

Used to adjust scanning length, vertical, and horizontal position
adjustment for front and back sides automatically 

4

Individual Position

1. Used to execute automatic length, vertical or horizontal
    position adjustment for front and back sides, individually
2. Used to adjust scanning length, vertical, or horizontal position
    for front and back sides manually

4

Double Feed

Used to correct the Double Feed Detector’s ultrasonic emission
level automatically or manually

4

Bent Paper Sensor

Used to correct the Bent Paper Sensor’s sending level
automatically or manually

4

USB ID

Used to set a USB ID for the scanner, connected to the PC 

3

Feed Speed

Used to change the paper feed speed

3

Other

Save Information 

Used to save the scanner and PC information

1