Read Panasonic KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) Service Manual Supplement online
5.2. "Section 8.3.14 CIS (Back)"
(1) Remove the Drive Rollers. (See 8.3.7.)
(2) Remove the Sensor Roller (Front). (See 8.3.9.)
(3) Open the Imprinter Door. (See 8.2.3. - (1) in case of the
Product KV-S2025C/S2026C Series)
(4) Remove the 2 screws (A).
(5) Disconnect the 2 connectors.
(One connector only for KV-S2025C/S2026C Series)
(6) Pull out the CIS (Back) to the rear of the unit to remove,
while lifting up the CIS (Back).
Reassembling Note
· Install the CIS (Back) so that the claws on the
both sides of CIS (Back) match with the slots on
the chassis.
the chassis.
Note:
Do not disassemble the plates attached to the CIS.
(Those plates will determine the CIS attachment
position to the scanner so that documents can be
properly scanned.)
(Those plates will determine the CIS attachment
position to the scanner so that documents can be
properly scanned.)
9
KV-S2025CSERIES / KV-S2026CSERIES / KV-S2045CSERIES / KV-S2046CSERIES
Click on the first or last page to see other KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) service manuals if exist.