Read Panasonic KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) Service Manual Supplement online
6.2. "Section 9.2 Function item list of Service Utility"
Service Utility item list is as follows.
Note:
When two or more scanners are connected to PC, execute
“Select Scanner” to define the evaluated scanner before
evaluating.
The procedure is as follows.
1. Click
“Select Scanner” on the Main Menu.
2. Select the product number and interface of the scanner to evaluate.
Item
Purpose
Remarks
Scanner Status
*2
To indicate scanner status. (Ready or Error or Warning)
2
"Section 9.3.3 Scanner Information"
*2
To indicate scanner information about Model, firmware version, board
revision, Interface, and so on.
revision, Interface, and so on.
2
Scanner Counter
Update All Counter
*2
To update counter values of System Counter, Cleaning roller Counter, and
Replacing roller Counter.
Replacing roller Counter.
1
Clear Counter for
cleaning roller
cleaning roller
*2
To clear Counter for cleaning roller to zero after cleaning roller.
1
Clear Counter for
replacing roller
replacing roller
*2
To clear Counter for replacing roller to zero after replacing roller.
1
Scanner Condition
Sleep Mode
*2
To set waiting time before entering to the sleep mode.
1
Clean Imprinter
*1, *2
To clean the ink jet head of imprinter.
6
Warning Setting
To set warning timing to clean roller and to replace roller.
3
Set Default
To set “sleep mode setting” and “warning timing to clean and to replace roller”
to the default.
to the default.
3
Test
LED
To light LED on the front panel with colors changing periodically
(Green — Orange — Red — Green —....)
(Green — Orange — Red — Green —....)
5
Key / Sensor
To do Key or Sensor ON / OFF test.
5
Sensor Sensitive Level To check sensitive level of each Sensor. (Waiting, Starting Position, Ending)
5
Feed Motor
To check Paper Feed Motor’s rotating.
5
Conveyor Motor
To check Conveyor Motor’s rotating.
5
Feed
To check paper feed condition.
5
Sleep Mode
To check whether sleep mode function works properly.
5
CIS LED Level
To check peak output level after setting CIS LED lighting level each side.
5
CIS Black Level
To check black level after setting black off-set level each side.
5
Memory
To execute memory R/W test.
5
Adjust
Shading
To execute shading correction.
4
All Position
To adjust scanning length, vertical, and horizontal positions for front and back
sides automatically.
sides automatically.
4
Individual Position
1.
To execute automatic length, vertical or horizontal position adjustment for
front and back sides, individually.
front and back sides, individually.
2.
To adjust scanning length, vertical, or horizontal position for front and
back sides manually.
back sides manually.
4
USB ID
*3
To set a USB ID. for the scanner, connected to PC.
3
Other
Save Information
*2
To save scanner and PC information.
1
Note
*1
: This item is available only when the optional Imprinter is installed. (KV-S2045C/S2046C Series only)
*2
: These items are included in User Utility software.
*3
: This setting is needed when replacing CONTROL Board or IC1039. (KV-S2026C/S2046C Series only)
Remarks
1.
Parameter setting by user
2.
Status indication
3.
Parameter setting by service person
4.
Adjustment
5.
Diagnosis
6.
Maintenance
11
KV-S2025CSERIES / KV-S2026CSERIES / KV-S2045CSERIES / KV-S2046CSERIES
Click on the first or last page to see other KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) service manuals if exist.