Read Panasonic KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) Service Manual Supplement online
6.3. "Section 9.3 Operation"
This section describes each operation (or status indication), according to the function item list shown in Sec. 9.2.
6.3.1. "Section 9.3.1 Scanner Status"
This function indicates scanner status, updating it every few seconds. The status messages and its contents are as follows.
Classified Code
Status Message
Contents
-
Scanner has no error.
No error
U11, U12, U13, U16
Jam occurred!
Please open the door and remove the paper.
Please open the door and remove the paper.
U11: Paper Feed Jam, U12: Jam1(around conveyor)
U13: Jam 2 (around conveyor), U16: Jam (around exit roller)
U13: Jam 2 (around conveyor), U16: Jam (around exit roller)
U18
Paper remains in the scanner.
Please open the door and remove the paper.
Please open the door and remove the paper.
Document remains in scanner, or dust is attached around a
sensor.
sensor.
U23
Double Feed occurred!
Please open the door and remove the paper.
Please open the door and remove the paper.
Double feed error.
U30
Scanner Door is open!
Please close the door.
Please close the door.
Door is open.
Fxx
System error occurred!
Please consult with a service representative.
Please consult with a service representative.
Service level error occurred.
-
*** Warning ***
The rollers need to be cleaned.
Please clean the rollers.
Please select Clear Counter button after cleaning the
rollers.
The rollers need to be cleaned.
Please clean the rollers.
Please select Clear Counter button after cleaning the
rollers.
Warning for cleaning rollers.
-
*** Warning ***
The rollers need to be replaced.
Please replace the rollers.
Please select Clear Counter button after replacing the
rollers.
The rollers need to be replaced.
Please replace the rollers.
Please select Clear Counter button after replacing the
rollers.
Warning for replacing rollers.
-
Scanner is not connected!
Scanner is not connected to PC properly.
Fig. 9.3.1 Scanner Status
6.3.2. "Section 9.3.2 Error Code"
Classified
Code
Error Code
Contents
ST1
ST2
ST3
ST4
—
00
00
00
00
No error
—
0A
00
00
00
Stop by clicking “
STOP”
—
0B
00
00
00
Stop by ADF stop-command
U10
10
00
00
00
No paper error
U11
11
00
00
00
Paper Feed Jam
U12
12
00
00
00
Jam1 (around conveyor)
U13
13
FF
x
x
Jam2 (around conveyor)
U16
16
00
00
00
Jam1 (around exit roller)
U18
18
00
00
00
Document remains in scanner
U23
1C
00
00
00
Double feed error
U30
20
00
00
00
Door open
F20
8A
x
x
00
SRAM error in G/A 1
F21
8B
x
x
00
Shading memory 1 error for G/A1
F22
8C
x
x
00
Shading memory 2 error for G/A1
F23
8D
x
x
00
Line memory error for G/A1
F24
8E
x
x
00
DRAM error for G/A1
F25
8F
x
x
00
SRAM error in G/A2
F26
90
x
x
00
Shading memory 1 error for G/A2
F27
91
x
x
00
Shading memory 2 error for G/A2
F28
92
x
x
00
Line memory error for G/A2
F29
93
x
x
00
DRAM error for G/A2
F30
94
x
x
x
G/A 1 Error
F31
95
x
x
x
G/A 2 Error
F50
40
00
00
00
Waiting sensor error
F51
41
00
00
00
Starting position sensor error
F55
45
00
00
00
Ending sensor error
F68
54
x
00
00
Front side lighting error (ST2: LED color 0: Red, 1: Green, 2: Blue)
F69
55
x
00
00
Back side lighting error (ST2: LED color 0: Red, 1: Green, 2: Blue)
Table 9.3.4 Error Code
12
KV-S2025CSERIES / KV-S2026CSERIES / KV-S2045CSERIES / KV-S2046CSERIES
Click on the first or last page to see other KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man4) service manuals if exist.