Read Panasonic KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man2) Service Manual Supplement online
10
4.2.2.
“Section 9.3.6 Test”
Item
Operation
Default
Remarks
Feed
1. Set documents on the Feed Tray.
2. Click “Feed“ on the main menu.
2. Click “Feed“ on the main menu.
3. Set “Test Condition” depending on each
scanning condition.
Note
Note
Operation “Imprinter” is available only
when the optional Imprinter is installed.
(KV-S2045C/S2046C Series only)
when the optional Imprinter is installed.
(KV-S2045C/S2046C Series only)
4. Click “START“on the “Feed“ dialog box to start feeding
documents.
5. According to the message on the display,
finish this test.
6. Click “Close“ to get back to the main menu.
Sleep Mode
1. Click “Sleep Mode“ on the main menu.
2. Click “START“ on “Sleep Mode“ dialog box to enter into
2. Click “START“ on “Sleep Mode“ dialog box to enter into
the sleep mode.
3. Click “STOP“ to get out of the sleep mode.
4. Click “Close“ to get back to the main menu.
4. Click “Close“ to get back to the main menu.
—
CIS LED Level
1. Click “CIS LED Level“ on the main menu.
2. Select a color (Red, Green, or Blue) on “CIS LED Level“.
3. Set “CIS LED Intensity Level“ of Front and Back sides on
2. Select a color (Red, Green, or Blue) on “CIS LED Level“.
3. Set “CIS LED Intensity Level“ of Front and Back sides on
“CIS LED Level“ dialog box.
4. Click “START“ on “CIS LED Level“ dialog box to start CIS
LED Level Test.
5. Check whether the peak level is within specifications.
(See Remarks.)
6. Click “STOP“ to finish this test.
7. Click “Close“ to get back to the main menu.
7. Click “Close“ to get back to the main menu.
Red
Note
*1: Holding white copier
paper between CIS and
inner conveyor in
scanner
paper between CIS and
inner conveyor in
scanner
Click on the first or last page to see other KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man2) service manuals if exist.