Read Panasonic KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man2) Service Manual Supplement online
9
4.2.
“Section 9.3 Operation”
This section describes each operation (or status indication), according to the function item list shown in Sec.9.2.
4.2.1.
“Section 9.3.1 Scanner Status”
This function indicates scanner status, updating it every few seconds. The status messages and its contents are as follows.
Fig. 9.3.1 Scanner Status
Classified Code
Status Message
Contents
—
Scanner has no error.
No error
U11, U12, U13, U16
A paper jam has occurred.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
U11: Paper Feed Jam, U12: Jam1(around conveyor)
U13: Jam 2 (around conveyor), U16: Jam (around exit roller)
U13: Jam 2 (around conveyor), U16: Jam (around exit roller)
U18
Paper remains in the scanner.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
Document remains in the scanner, or dust is attached around a
sensor.
sensor.
U23
A paper double feed has occurred.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
Open the scanner’s door, remove the
documents, and close the cover.
Place the documents back in the
document feed tray.
Double feed error
U30
Scanner Door is open!
Please close the door.
Please close the door.
Door is open.
Fxx
System error occurred!
Please consult with a service representative.
Please consult with a service representative.
Service level error occurred.
—
*** Warning***
The rollers need to be cleaned.
Please clean the rollers.
Please select Clear Counter button after cleaning
rollers.
The rollers need to be cleaned.
Please clean the rollers.
Please select Clear Counter button after cleaning
rollers.
Warning for cleaning rollers.
—
***Warning***
The replaceable rollers (consumable) are
close to reaching their usable life.
To insure reliable operation, please
replace these rollers with Roller
Exchange Kit for your specific scanner.
After replacing the rollers, select the
“Clear Counter” button.
The replaceable rollers (consumable) are
close to reaching their usable life.
To insure reliable operation, please
replace these rollers with Roller
Exchange Kit for your specific scanner.
After replacing the rollers, select the
“Clear Counter” button.
Warning for replacing rollers.
—
Scanner is not connected!
Scanner is not connected to PC properly.
Click on the first or last page to see other KV-S2025C / KV-S2026C / KV-S2045C / KV-S2046C (serv.man2) service manuals if exist.