Read Panasonic KV-S1045C (serv.man2) Service Manual Supplement online
4
3 “SECTION 9 SERVICE UTILITY & SELF TEST”
3.1.
“Section 9.3 Operation”
3.1.1.
“Section 9.3.7 Adjustment”
Item
Operation
Default
Remarks
Individual Position 1. Adjust Automatically.
a. Set Test Chart A (Part No.: See 14.4.) on the Feed Tray
in portrait orientation.
b. Click “Individual Position” on the main menu.
c. Click one of 8 “Adjust Automatically” buttons on the
“Individual Position” dialog box to execute the
adjustment.
d. Check the result.
e. Click “OK” to finish the adjustment.
f. Click “OK” to return to the main menu.
in portrait orientation.
b. Click “Individual Position” on the main menu.
c. Click one of 8 “Adjust Automatically” buttons on the
“Individual Position” dialog box to execute the
adjustment.
d. Check the result.
e. Click “OK” to finish the adjustment.
f. Click “OK” to return to the main menu.
2. Adjust Manually.
a. Click “Individual Position” on the main menu.
b. Change the parameters (mm, %) on the “Individual
Position” dialog box as required. (Refer to Remarks.)
c. Click “OK” to renew the setting, and to return to the
main menu.
a. Click “Individual Position” on the main menu.
b. Change the parameters (mm, %) on the “Individual
Position” dialog box as required. (Refer to Remarks.)
c. Click “OK” to renew the setting, and to return to the
main menu.
—
1. Adjust Automatically
(8 adjustments)
a. Length
b. Paper End Position
c. Front Paper Width
d. Front V. Position
e. Front H. Position
f. Back Paper Width
d. Back V. Position
e. Back H. Position
(8 adjustments)
a. Length
b. Paper End Position
c. Front Paper Width
d. Front V. Position
e. Front H. Position
f. Back Paper Width
d. Back V. Position
e. Back H. Position
2. Adjust Manually
(Length)
(Length)
+: Increasing the
number makes the
scanning document
length shorter.
scanning document
length shorter.
(Paper End Position)
+: On the LC (Length
Control) mode, increasing
the number allows the
paper-end timing to be
earlier.
(Width)
+: On the LC (Length
Control) mode, increasing
the number allows the
paper-end timing to be
earlier.
(Width)
+: Decreasing the
number extends the
scanning document
width.
scanning document
width.
(Vertical Position)
+: Increasing the
number makes the
document scanning
position shifted
upward.
document scanning
position shifted
upward.
(Horizontal Position)
+: Increasing the
number makes the
document scanning
position shifted to the
left.
document scanning
position shifted to the
left.
Note:
If the appropriate
scanning position can
not be obtained by any
of the manual
adjustments, check the
Optical Unit installation.
scanning position can
not be obtained by any
of the manual
adjustments, check the
Optical Unit installation.
Click on the first or last page to see other KV-S1045C (serv.man2) service manuals if exist.