Read Panasonic KV-S1025C / KV-S1020C Service Manual Supplement online
10
5.2.
“Section 9.2 Service Utility Function”
The Service Utility function is as follows.
Note:
Note:
When two or more scanners are connected to the PC, execute “Select Scanner” to define the scanner before evaluating.
The procedure is as follows.
1. Click “Select Scanner” on the Main Menu.
2. Select the product number of the scanner to evaluate.
Note:
*1
: These items are included in User Utility software.
*2
: This setting is needed when replacing CONTROL Board or IC1011.
*3
: Available only for KV-S1025C Series
Remarks
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diagnosis
(6) Maintenance
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diagnosis
(6) Maintenance
Item
Purpose
Remarks
Scanner Status
*1
Used to indicate the scanner status (Ready, Error, or
Caution
)
(2)
Scanner Information
*1
Used to indicate the scanner information, such as Model, Firmware Version,
Interface, and etc.
Interface, and etc.
(2)
Scanner Counter
Update All Counters
*1
Used to update the values of System Counter, Cleaning Roller Counter, and
Replacing Roller Counter
Replacing Roller Counter
(1), (6)
Clear Counter
*1
(After Clean Roller)
Used to reset the Cleaning Roller Counter to zero after cleaning the roller
(1), (6)
Clear Counter
*1
(After Replace
Roller)
Used to reset the Roller Replacement Counter to zero
after replacing the rollers.
after replacing the rollers.
(1), (6)
Scanner Condition
Sleep Mode
*1
Used to set "Waiting Time" before entering the Sleep Mode
(1)
Vertical Line
Reduction
Reduction
*1
Used to reduce vertical lines on the scanned image caused by a scratch or
dust in the scanning area
dust in the scanning area
(4)
Caution
Setting *1
Used to set the number of
pages that can be scanned before
Service Utility displays the caution information (roller
replacement timing and roller cleaning timing) to the user
replacement timing and roller cleaning timing) to the user
(3)
Set Default
Used to set the “Sleep Mode” and “
Caution
Setting" to the default settings
(3)
Test
LED
Used to test the LEDs (Green, Red) on the front panel by turning on/off
periodically
periodically
(5)
Key / Sensor
Used to perform the Key or Sensor ON/OFF test
(5)
Conveyor Motor
Used to check Conveyor Motor Rotation
(5)
Feed
Used to check the paper feed mechanism
(5)
Sleep Mode
Used to check whether sleep mode function works properly
(5)
CCD Level
Used to check a maximum peak level after setting CCD gain
(5)
Focus
Used to monitor the image output level generated within the effective Pixel
Width of CCD
Width of CCD
(5)
Memory
Used to execute memory R/W test
(5)
Adjust
Shading
Used to execute shading correction
(4)
All Position
Used to adjust the scanning length, width, paper-end, vertical, and horizontal
positions for front
positions for front
*3
(and back) sides, automatically
(4)
Individual Position
1. Used to execute automatic length, width, paper-end, vertical, or horizontal
position adjustment for front (and back)
position adjustment for front (and back)
*3
sides, individually
2. Used to adjust scanning length, width, paper-end, vertical, or horizontal
positions for front (and back)
positions for front (and back)
*3
sides manually
(4)
USB ID
*2
Used to set a USB ID for the scanner connected to the PC
(4)
Other
Save Information
*1
Used to save the scanner and PC information
(1)
Click on the first or last page to see other KV-S1025C / KV-S1020C service manuals if exist.