Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
10
General
*1
The power requirements differ depending on the country/area. Do not use a power source that does not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
*2
If connected to a network device (hub, router, etc.) that supports IEEE802.3az.
*3
To assure continued emission limit compliance, use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or higher
for 10Base-T / 100Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000Base-T.
*4
The actual line speed may be different depending on the network environment and the wireless devices connected.
*5
Depending on the wireless router (wireless access point) used, connections may not be possible between the unit and the
wireless router. When connecting with 802.11n, select WPA-PSK (AES) or WPA2-PSK (AES) for security. Use WPA2 (AES) for
security. If WPA (AES), WPA (TKIP) or WPA2 (TKIP) must be used, please set the access point key renewal interval for 2
minutes. A difficult to predict passkey (PSK) of 20 or more characters is recommended.
security. If WPA (AES), WPA (TKIP) or WPA2 (TKIP) must be used, please set the access point key renewal interval for 2
minutes. A difficult to predict passkey (PSK) of 20 or more characters is recommended.
Item
KV-N1058X/Y
KV-N1028X/Y
External dimensions
(Width x Depth x Height)
(Width x Depth x Height)
300 mm × 272 mm × 238 mm (11.8 in. × 10.7 in. × 9.4 in.)
Weight
4.1 kg (9.0 lb.)
power requirement
*1
AC 100 – 127 V, 50/60 Hz, 0.8 A
AC 220 – 240 V, 50/60 Hz, 0.4 A
AC 220 – 240 V, 50/60 Hz, 0.4 A
Power
consumption
consumption
Scanning
36W or less
Ready
10 W or less
Sleep
2 W or less (USB connection)
2 W or less (Wired LAN Connection)
2 W or less (Wired LAN Connection)
*2
2 W or less (Wireless LAN Connection)
Power OFF
AC 100 – 127 V: 0.3 W or less
AC 220 – 240 V: 0.5 W or less
AC 220 – 240 V: 0.5 W or less
Operating environment
Temperature: 5
o
C – 35
o
C (41
o
F – 95
o
F)
Humidity: 20 % – 80 % RH
Storage environment
Temperature: -10
o
C - 50
o
C (14
o
F - 122
o
F)
Humidity: 8 % - 75%RH
Interface
USB3.1 Gen1 (backward compatible)
LAN (10Base-T / 100Base-TX / 1000Base-T)
*3
Wireless LAN (IEEE802.11n/g/b)
Recommended web browser
Internet Explorer 11
Mozilla Firefox (latest version)
Google Chrome (latest version)
Mozilla Firefox (latest version)
Google Chrome (latest version)
Wireless LAN
Communication
standard
standard
IEEE802.11n/g/b
Frequency range
(center
frequency) /
Channel
(center
frequency) /
Channel
KV-N1058X [U] / [ML] :
2.412 GHz – 2.472 GHz (1 – 13ch)
KV-N1058X [M] / [B]
KV-N1028X [M] :
2.412 GHz – 2.462 GHz (1 – 11ch)
2.412 GHz – 2.472 GHz (1 – 13ch)
KV-N1058X [M] / [B]
KV-N1028X [M] :
2.412 GHz – 2.462 GHz (1 – 11ch)
Data transfer
rate
rate
*4
IEEE802.11n: 6.5 – 150 Mbps
IEEE802.11g: 6 – 54 Mbps
IEEE802.11b: 1 – 11 Mbps
IEEE802.11g: 6 – 54 Mbps
IEEE802.11b: 1 – 11 Mbps
Access method
Station mode / Simple AP mode
Security
*5
WPA/WPA2-PSK(TKIP/AES) / WPA/WPA2-EAP(EAP-TLS/EAP-
TTLS(MSCHAPv2)/PEAPv0(MSCHAPv2)) / Open System
TTLS(MSCHAPv2)/PEAPv0(MSCHAPv2)) / Open System
Wi-Fi Protected
Setup (WPS)
Setup (WPS)
PBC (Push Button Configuration) method / PIN (Personal
Identification Number) method
Identification Number) method
RF output power
IEEE802.11n: 13 dBm ± 1 dB
IEEE802.11g: 13 dBm ± 1 dB
IEEE802.11b: 17 dBm ± 1 dB
IEEE802.11g: 13 dBm ± 1 dB
IEEE802.11b: 17 dBm ± 1 dB
Indicator of radio
field intensity
(RSSI level)
field intensity
(RSSI level)
Signal levels:
> -65dBm: Good
> -82dBm: Marginal - Can be used under certain conditions
< -82dBm: Unreliable
> -65dBm: Good
> -82dBm: Marginal - Can be used under certain conditions
< -82dBm: Unreliable
Option
Roller exchange kit (KV-SS061)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.