Read Panasonic KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y Service Manual online
13
5.6.
Installing the Software
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.19).)
5.7.
Uninstalling the Software
Refer to the concerned pages of Operating Manual (See 16. Appendix ((Operating Manual P.129).)
5.8.
Setting Documents and/or Card
Note:
*1: The height of all the documents should be less than 10.0 mm (0.4 in.)
Refer to the "Compatible Paper" of the Operating Manual (See 16. Appendix (Operating Manual P.37).)
*2: The height of the cards should be less than 5.0 mm (0.2 in.)
*3: The height of all the documents should be less than 2mm (0.08 in.)
(This is equivalent to about 20 sheets at 80 g/m² or 20 lb.)
*4: When using the Mixed Batch Card Guide, the document guides can not be adjusted to a width smaller than A5.
*5: ISO format card
Size: 85.6 x 54.0 mm (3.4 in. x 2.1 in.), Thickness: 0.76 mm (0.03 in.), Embossed card up to 1.4 mm (0.055 in.)
- Embossed card is also supported.
When scanning embossed cards, it is recommended to place them in landscape orientation with the side to be
scanned facing up.
- Ensure that the embossed portions of cards do not stick together.
- Use the landscape orientation when scanning an embossed card. If the scanning fails, place the card upside
down, and then try again.
*6: Available only by using Mixed Batch Card Guide
- Set the card in landscape orientation.
The card set on the Mixed Batch Card Guide is fed after completing the paper document scanning.
Scanning Condition
Capacity
Documents
on the Feed Tray
Cards
on the Feed Tray
Cards
on Mixed Batch Card Guide
Paper Only
100 sheets
*1
—
—
Card Only
—
3 cards
*2 *5
—
Mixed scanning
(Paper and Card)
20 sheets
*3 *4
—
3 cards
*5 *6
Click on the first or last page to see other KV-N1058X / KV-N1028X / KV-N1058Y / KV-N1028Y service manuals if exist.