Read Panasonic EY7440-U1 Service Manual online
Ref. No. 2G
Procedure 2A
→
→
→
→ 2B →
→
→
→ 2C→
→
→
→ 2D→
→
→
→ 2E→
→
→
→ 2F→
→
→
→
2G
Attachment of the Housing.
1. Place the driving block onto the housing A and place the spring
for release lever and the hook release lever.
2. Place the switch assembly, operation panel, click spring and F/R
selector handle onto the housing A.
for release lever and the hook release lever.
2. Place the switch assembly, operation panel, click spring and F/R
selector handle onto the housing A.
NOTE :
Make sure that the lead wires are pressed fit firmly.
3. Close the housing A and B with pushing the radiating plate on the
direction of the arrow and tighten 8 housing screws.
direction of the arrow and tighten 8 housing screws.
NOTE :
Confirm to set the radiating plate properly. If the radiating plate
lean toward the motor brush side, the housing B can not be
closed.
lean toward the motor brush side, the housing B can not be
closed.
4. Place the H/L change handle into the rail properly.
5. Insert the belt hook into the housing and tighten with hook bolt.
5. Insert the belt hook into the housing and tighten with hook bolt.
8
EY7440-U1 /
Click on the first or last page to see other EY7440-U1 service manuals if exist.