Read Panasonic NN-GM231WZPE Service Manual online
5-13
CONDITION
CHECK
RESULT
CAUSE
REMEDY
CONDITION
CHECK
RESULT
CAUSE
REMEDY
1. Fuse blows.
Continuity.
No continuity.
Continuity.
Shorted contact at
the primary switch.
the primary switch.
Replace fuse,
primary, monitors
and secondary
switches.
primary, monitors
and secondary
switches.
No continuity.
Normal.
Defective high
voltage capacitor.
voltage capacitor.
Replace high
voltage capacitor.
voltage capacitor.
Fuse blows again
Defective high volt-
age transformer.
age transformer.
Replace high volt-
age transformer.
age transformer.
Malfunction of the
monitor switch.
monitor switch.
Replace fuse,
primary, monitor
and secondary
switches.
primary, monitor
and secondary
switches.
Check continuity
of monitor
switch (with
door closed).
of monitor
switch (with
door closed).
Check continuity
of primary
switch (with
door opened).
of primary
switch (with
door opened).
Disconnect one
side of the wire
lead connected
from transformer
to the high
voltage
capacitor and
operate the unit.
side of the wire
lead connected
from transformer
to the high
voltage
capacitor and
operate the unit.
Replace fuse
(TROUBLE 1) Oven lamp does not turn on when the timer is set with door closed.
(TROUBLE 2) Oven does not start even though the timer is set.
NOTE : All these switches must be replaced at the same time.
1. Oven does not
operate.
No continuity.
No continuity.
Adjust or replace.
Malfunction of the
primary switch.
primary switch.
Malfunction of the
secondary switch.
secondary switch.
Adjust or replace.
Check theĀ
continuity of the
primary switch.
with door
closed.
continuity of the
primary switch.
with door
closed.
Check the
continuity of the
secondary
switch with
secondary
switch pushed.
continuity of the
secondary
switch with
secondary
switch pushed.
Click on the first or last page to see other NN-GM231WZPE service manuals if exist.