Read Panasonic NN-GM231WZPE Service Manual online
5-10
COMPONENTS
TEST PROCEDURE
RESULTS
FUSE
THERMAL
CUT-OUT
CUT-OUT
Check for continuity of the fuse with an
multi-meter.
multi-meter.
NOTE: If the fuse is blown, check the primary, the secondary, and the monitor switches,
H.V.D. and H.V.C. before replacing the fuse.
If the fuse is blown by improper switch operation replace the defective switch and the
fuse at the same time. Replace just the fuse if the switches operate normally.
H.V.D. and H.V.C. before replacing the fuse.
If the fuse is blown by improper switch operation replace the defective switch and the
fuse at the same time. Replace just the fuse if the switches operate normally.
Normal Abnormal
TIMER MOTOR
(Wire leads removed)
(Wire leads removed)
(TIME
SW
Below specified
temperature
specified
temperature
Above
)
A
Note:
TIME S/W and microwave
A is
Ω
Abnormal:
∞ or several
Normal: Approx.10~30K
Ω
ON/OFF
Measure the resistance.
(Ohm-meter scale: R x 1000)
(Ohm-meter scale: R x 1000)
Click on the first or last page to see other NN-GM231WZPE service manuals if exist.