Read Panasonic NN-CS894BZPE Service Manual online
4.2.1. To replace magnetron
1. Remove air guide D.
2. Remove 2 screws holding air guide F.
3. Remove 1 screw holding thermistor on magnetron.
4. Remove 3 screws holding magnetron.
NOTE:
After
replacement
of
the
magnetron,
tighten
mounting screws properly, making sure there is no
gap between the waveguide and the magnetron to
prevent microwave leakage.
gap between the waveguide and the magnetron to
prevent microwave leakage.
CAUTION
When replacing the magnetron, be sure the antenna gasket is in
place.
place.
4.2.2. To replace H.V Inverter
1. Release 4 catch hooks, then remove inverter cover.
2. Remove 2 screws holding H.V. Inverter.
12
NN-CS894B
Click on the first or last page to see other NN-CS894BZPE service manuals if exist.