Read Panasonic NN-C781JF Service Manual online
- 16 -
6. Heater
1.
Remove belt.
2.
Remove 2 lead wires from heater.
3.
Remove 2 screws holding heater and oven temperature
sensor.
4.
Turn right to release hooks to remove heater assembly.
5.
Remove a screw to release heater.
EXHAUST GUIDE
SENSOR MOUNTING PLATE
HOOK
HOOK
SENSOR MOUTING PLATE
METAL
SURFACE
SURFACE
SURFACE OF LEAD WIRE
(WHITE SURFACE)
(WHITE SURFACE)
METAL SIDE
TO DETECT
STEAM
TO DETECT
STEAM
FROM OVEN
CAVITY
CAVITY
7. Steam sensor
1. Remove 1 screw holding steam sensor unit.
2. Disconnect CN2 connector from digital programmer circuit
board.
3. Remove exhaust guide from steam sensor unit.
4. Remove catch hooks on sensor mounting plate and air guide.
5. Remove steam sensor from sensor mounting plate.
NOTE: When installing the steam sensor, make sure that the
direction of steam sensor is as shown in figure.
TO RELEASE
HEATER UNIT
BELT
Click on the first or last page to see other NN-C781JF service manuals if exist.