Read Panasonic NN-C781JF Service Manual online
- 15 -
PUSH
DOOR ARM
DOOR
DOOR
SPRING
LEFT
HINGE
CATCH HOOKS
HINGE PIN
HINGE PIN
CUT
TURNTABLE
MOTOR
MOTOR
4. Door assembly
1.
Remove door spring right side.
NOTE: Please hold door unless door become fall down.
2.
Remove door arm lever by pushing tab and turn clock wise.
3.
Remove door spring left.
4.
Insert flat blade screw driver to release hinge pin from left hinge.
5.
Slide out left hinge pin to release the door.
6.
Slide out door arms from the oven to disconnect door assembly.
7.
Remove door arms from the door assembly.
To remove door C
8.
Release catch hooks from hinge pin side.
To remove door E
9.
Remove screws holding door E to door A assembly.
After replacement of the defective component parts of the
door, reassemble it and follow the instructions below for
proper installation and adjustment so as to prevent an
excessive microwave leakage. Adjustment of the door
assembly.
10. When mounting the door to the oven, be sure to adjust, the
door parallel to the oven face plate by moving hinges back or
front.
NOTE: Upper portion of door A should farmly touch to oven
face plate without pushing.
5. Turntable motor
1.
Breaking off at 5 spots indicated by allow with a cutter or like.
2.
Remove 2 screws holding motor cover.
3.
Disconnect 2 lead wires from turntable motor.
4.
Remove 2 screws holding turntable motor.
NOTE: Make sure to remove sharp barrs at 5 spots to avoid
possible injury.
Click on the first or last page to see other NN-C781JF service manuals if exist.