Read Panasonic NC-PF30PV Service Manual online
- 21 -
NC-PF30PV
2.17. Stopper comp.
1. Adjust lock pin of Stopper comp. at “Release”.
2. Put minus screwdriver into Stopper comp. gap and use power to remove it.
Operating point
- After assemble, should to feel to touching of Supporting plate on Lock knob.
Stopper comp.
Fig. 18
2.18. Lock lever A (Assemble - Remove Knob)
Bottom up Thermo Pot and press Lock lever A deepest then push it down and pull out.
Fig. 19
Lock lever A
w
Remove this portion
as shown with arrow
Click on the first or last page to see other NC-PF30PV service manuals if exist.