Read Panasonic NC-PF30PV Service Manual online
Water supply mark
Approx. 1000 ml.
- 3 -
NC-PF30PV
1. Problems Checking
Please follow check operating detail below, before
start to check the problems.
1.1. Thermo Pot Performance
Test Mode
1.1.1. Boiling and keep warm test
How to operate
How to operate
1. Pour approx. 1000 ml water into the container.
2. Supply with electirc power.
3. Press SELECT to set 98 keep warm.
2. Supply with electirc power.
3. Press SELECT to set 98 keep warm.
LED symbol for this instruction show as
below
●
Lighted Blink
Instruction
1. Long boil/Reboil LED will be lighted and start to
boil water. (LCD monitor will display temperture
in every 5 degree)
2. After 9 min. Keep Warm LED will be lighted and
change to keep warm state.
change to keep warm state.
At first water will be boiled to 100
If choose Keep Warm at 98, LCD monitor will be
changed to 98 in approx. 9 min..
If choose Keep Warm at 90, LCD monitor will be
changed to 98 in approx. 3 min. and will change to
display 90 in approx. 7~16 min..
If choose Keep Warm at 80, LCD monitor will be
changed to 98 in approx. 3 min. and will change to
display 80 in approx. 30 min. ~1 hr..
If choose Keep Warm at 60, LCD monitor will be
changed to 98 in approx. 3 min. and will change to
display 60 in approx. 3~4 hr..
Amout of Water
: Maximum
Room Temp.
: 20°C
Previous Keep Warm Setting
: 90°C
60 80 90 98
25
Click on the first or last page to see other NC-PF30PV service manuals if exist.