NC-EG4000WTS, NC-EG3000WTS (serv.man2) - Panasonic Home Appliance Service Manual Simplified (repair manual). Page 10

10

Please follow check operating detail bellow, before start to check the problems.
LED symbol for this instruction show as below.

1. Pour water into the container.
2. Press “Long Boil / Reboil” button and  “Select / Clean-

ing(Press 3s)” button, all together, and then supply elec-
tric power.

• LED

 : ON (Flashing / 90-6h Timer-70-80-98-90----)

•

Heater : OFF

• Others

 : When it passes for about 30 seconds in the state made

nothing,  "

The  body  test  mode"  releases  and  shifts  to  "Usual

mode".

1. Pour water into the container.

Press “Long Boil / Reboil” button and  “Select / Cleaning(Press 3s)” button, all together, and then supply electric power.
Start Thermo Pot performance test mode when turn on with “Long Boil / Reboil” button and  “Select / Cleaning(Press 3s)” but-
ton on.
Operate reset action after 30 seconds.

Button

Motor

LED

Long Boil / 

Reboil

98

90

80

70

6h Timer

Lock / 

Unlock

“Long Boil / Reboil”

+

“Select / Cleaning(Press 3s)”

OFF

OFF

ON

90--6h timer--70--80--98--90---(Flashing)

OFF

• When “Pour Out” button is pressed, hot water comes out.