Read Panasonic MC-V9658-00 Service Manual online
9
3 SERVICE PROCEDURES - POWER NOZZLE
3.1.
BELT
3.1.1.
Belt Removal
1. Turn Power Nozzle upside down.
2. Unscrew the two (2) Power Nozzle cover screws.
2. Unscrew the two (2) Power Nozzle cover screws.
3. Turn Power Nozzle right side up. Press handle release
pedal and lower the swivel. Lift rear latches up.
4. To remove cover, grasp the sides and pull out.
5. Depress tabs on rear of agitator cover and rotate forward
to release from the Power Nozzle base.
6. Lift agitator assembly out and remove worn belt.
3.1.2.
Belt Replacement
1. Install new belt over motor drive, then over brush
sprocket.
2. Place agitator assembly back into Power Nozzle.
3. Reinstall agitator cover by lining up the front tabs and
slots and rotating downward until the latches snap into
place.
place.
4. Line up front of cover and base. Rest cover on front edge
Click on the first or last page to see other MC-V9658-00 service manuals if exist.