Read Panasonic MC-E601 / MC-E603 Service Manual online
Fig.8
Note
The two carbon brushes should be replaced at the same
time.
time.
1. Take out motor unit and remove motor cover as explained
previously in paragraph 3.1 Motor, points 1-5.
2. Disconnect
lead
wires
(provided
with
quick-connect
terminal) from the carbon brush holder tabs.
3. Remove the screw from the carbon brush holder to take it
out. (Fig. 9)
4. Replace carbon brush unit with a new one.
fig.9
5. Insert the new carbon brush unit into the motor housing and
refasten the screw. (Fig. 10)
6. Connect the lead wires to the motor tabs and reassemble
motor unit.
7. Connect the lead wires to the motor tabs and reassemble
motor unit.
fig.10
3.2.
CARBON BRUSHES
6
MC-E601 / MC-E603
Click on the first or last page to see other MC-E601 / MC-E603 service manuals if exist.