Read Panasonic MC-E601 / MC-E603 Service Manual online
Fig.4
5. Take out motor unit and remove 2 crews to take out motor
cover. (Fig. 5)
Fig.5
6. Disconnect the lead wires (provided with quick-connect
terminals) from the carbon brush holder tabs and remove
front motor support. (Fig. 6)
front motor support. (Fig. 6)
7. Replace the motor with a new one and connect the lead
wires to the carbon brush holder tabs.
Fig.6
8. Reassemble front motor support and motor cover. Then
refasten the two screws. (Fig. 7)
Note
Make sure the lead wires are correctly positioned to
avoid pinching them between parts.
avoid pinching them between parts.
Fig.7
9. Place the motor unit and cord reel ass´y into the lower
body.Note: Align rear motor support with the lower body
guides. (Fig. 8)
guides. (Fig. 8)
10. Connect the lead wires according to the schematic diagram
and reassemble the remaining parts in the reverse order.
Note
Before reassembling upper body and exhaust cover
introduce the cord plug through their holes.
introduce the cord plug through their holes.
5
MC-E601 / MC-E603
Click on the first or last page to see other MC-E601 / MC-E603 service manuals if exist.