Read Panasonic MC-E3011 Service Manual online
1. Loosen 5 screws from the base plate (Floor nozzle lower
unit) and remove it.
(Fig. 1)
(Fig. 1)
2. Remove the beater bar unit from the floor nozzle upper unit.
(Fig. 2)
3. Remove the 1 screw from the pedal shaft to detach the
pedal. (Fig. 3)
4. Pull out the pedal shaft slightly. Remove the tip of the shaft
from the metal plated of the idler pulley. Then remove it
together with the pedal.
together with the pedal.
5. Remove belt B from the motor shaft and then from the idler
pulley.
6. Remove the belt from the beater bar unit and then from the
idler pulley.
7. Fit a new belt and belt B by reversing the disassembly
procedure. Fit the belt first, then belt B.
4 REPLACEMENT OF MAIN PARTS
IMPORTANT: Before replacing any part always DISCONNECT THE CLEANER FROM THE ELECTRICITY SUPPLY.
4.1. BELT (Beater bar belt), BELT B (Motor shaft belt)
6
MC-E3011
Click on the first or last page to see other MC-E3011 service manuals if exist.