MC-E3011 - Panasonic Home Appliance Service Manual (repair manual). Page 9

Read Panasonic MC-E3011 Service Manual online

 5. 
 a. Take out the motor and detach the motor support rubber
(rear) and cushion plate (Fig. 10).
 b. Disconnect the lead wires, and detach the noise
absorber and motor support rubber (front) (Fig.11)
 6. Replace the motor with a new one.
 7. Re-assemble front / rear motor supports, noise absorber
and connect the lead wires to the motor.
 8. Re-install the motor and reassemble motor case and
remaining parts in the reverse order.
NOTE:
Make
sure
the
lead
wires
are
correctly
positioned to avoid pinching them between parts.
* Connection of lead wire A unit during assembly
Connect lead wire A unit as shown in Fig. 11-1 so that
the unit is inserted in the cut of the noise absorber.
4.5. CARBON BRUSHES
Note: Replace both carbon brushes at the same time.
 1. Take out motor unit and remove motor case as explained
previously in paragraph.FAN MOTOR UNIT. (4.4.1. to
4.4.4.)
 2. Disconnect
lead
wires
(provided
with
quick-connect
terminal) from the motor tabs.
 3. Remove the two screws from the carbon brush holder and
take it out. (Fig.12)
 4. Replace the carbon brush unit with a new one and re-install
it re-fastening with the screw.
 5. Connect the lead wires according to the schematic diagram
and reassemble the motor unit.
9
MC-E3011
Page of 12
Display

Click on the first or last page to see other MC-E3011 service manuals if exist.