Read Panasonic ES8161-E2 / ES8162-E2 / ES8163-E2 Service Manual online
<TROUBLE>
<CHECK>
<REMEDY>
Noise is too loud.
→ Check if there any deformation with the outer foil.
NO Replace the outer foil or
Amplitude is too small.
→
→
→
→ oiling a drop on the foil.
↓↓↓↓ OK
<CHECK DRIVING BARS.>
NO Replace the trimmer
Check if there is any deformation with trimmer driving bar and slit blade
→
→
→
→ driving bar or slit blade
driving bar.
driving bar.
↓↓↓↓ OK
<CHECK DRIVING HEAD AMPLITUDE.>
NO Replace linear motor
Turn the switch ON, and measure the amplitude by checking a pin of driving head.
→
→
→
→ assembly or module.
(See the figure shown below.)
↓↓↓↓ OK
<CHECK TREMBLE LINEAR MOTOR.>
NO Tighten four screws.
Confirm housing screws if these are tightened firmly after replacing the back panel.
→
→
→
→
↓↓↓↓ OK
<CHECK TREMBLE LINEAR MOTOR.>
NO Replace housing A or
Check the wear condition in each part, Housing A, Linear motor assembly or
→
→
→
→ float springs.
Float springs.
Does not move pivot
<CHECK FLOAT SUSPENSION.>
NO Repair float springs or
action selector or
→ Confirm if the float springs are assembled properly.
→
→
→
→ clean.
does not float
Confirm if the beard chips collect around the linear motor assembly.
the head smoothly.
↓↓↓↓ OK
<CHECK FLOAT SUSPENSION.>
NO Greasing "FLOIL G741".
Check if the grease still remains on the housing A and the housing B.
→
→
→
→
Shaver head does
<CHECK PIVOT ACTION SELECTOR.>
NO Confirm the deformation
not fix even changing
→ Confirm the smooth movement of the lock lever shaft after removing
→
→
→
→ of lock lever shaft.
pivot action selector.
the back panel.
Replace linear motor
assembly.
assembly.
↓↓↓↓ OK
<CHECK FLOAT SUSPENSION.>
NO Replace back panel.
Confirm the action selector fixture is set properly after assembling the back
→
→
→
→
panel.
8
ES8161-E2 / ES8162-E2 / ES8163-E2
Click on the first or last page to see other ES8161-E2 / ES8162-E2 / ES8163-E2 service manuals if exist.