UF-490, UF-4000, UF-4100 - Panasonic Fax Service Manual (repair manual). Page 117

117

601

XMT

ADF Door was opened during ADF  
transmission.

623

XMT

A

No original was in the ADF. (Built-
in dialer engaged)

Operator removed the original from the 
ADF after dialing was completed.
Original was not set properly in the ADF.

630 XMT or RCV

(Polling)

B

Redial count over.

No dial tone detected. Sensor dial tone 
is not detected. (desitination dependent)
Busy tone is detected. (desitination 
dependent) T1 timer (35±5 sec.) 
elapsed without a signal from the 
receiver.

631

XMT

A

"STOP" button was pressed during 
Auto Dialing.

634

XMT

Redial count over with no response 
or busy tone was not detected.
Note:

U.S.A. and Canadian models 
will redial only once if a busy 
tone is not detected.

Line Cable unplugged.
Wrong number.
SC PCB is abnormal

638

XMT

Power turned off with applicable 
data in memory or during 
communication.

Power switched off. Power failure 
occurred.

741 XMT, Polling

Unable to dial

Deleted the registered station name 
before dialing with Timer Controlled 
Communications, etc.

800

Relay 

Comm.

The machine was requested to 
relay a document but has no Relay 
Hub capability.

816 Conf. Polled

"The received Polling Password 
did not match. The machine does 
not have Confidential Comm. 
capability."

870

MEM XMT 

Multi-Copy

Memory overflow occurred while 
storing documents into memory.

880

-

-

File Access Error.

884

-

-

File Access Error.

887

-

-

Power Failure.