Read Panasonic UF-490 (serv.man2) Service Manual online
125
Note 1: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 2: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 3: The default setting of parameters depends on the country’s specifications or regulations. Print the
Function Parameter List to confirm the default settings.
130 BUSY-ACK
TIMING
• In Busy
• After Busy
• While Busy
• After Busy
• While Busy
Selects the signal timing between the BUSY and
ACK signal in Printer Interface Mode.
ACK signal in Printer Interface Mode.
131 CMD RCV GRD
TIMER
1 min.
~
15 min.
~
15 min.
Selects the Guard Timer between each GDI
Command in Printer Interface Mode.
Command in Printer Interface Mode.
132 PRT DATA
TIMER
1 min.
~
15 min.
~
15 min.
Selects the Guard Timer between each GDI Data
Frame in Printer Interface Mode.
Frame in Printer Interface Mode.
133 COLLATION
(PRT)
1 = Off
2 = On
3 = Auto
2 = On
3 = Auto
Selects the Print Collation in Printer Interface Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
134 COLLATION
(PC I/F)
1 = Off
2 = On
3 = Auto
2 = On
3 = Auto
Selects the Print Collation in PC Interface Mode.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
When “Auto” is selected, print collation will operate
according to the setting in Fax Parameter #65.
135
~
199
Not Used
Signal
Setting
1:128
2:256
3:512
4:1024
5:2048
6:Off
MCF/PIP
0-31
0-63
0-127
0-255
0-511
Always
RTP/PIP
32-63
64-127
128-255
256-511
512-1023
-
RTN/PIN
64-127
128-255
256-511
512-1023
1024-2047
-
Signal
Setting
1:5%
2:10%
3:15%
4:20%
MCF/PIP
0-2
0-4
0-7
0-9
RTP/PIP
3-4
5-9
8-14
10-19
RTN/PIN
5-
10-
15-
20-
Function Parameter Table
No.
Parameter
Selections
Function
Click on the first or last page to see other UF-490 (serv.man2) service manuals if exist.