Read Panasonic KX-FL423RU Service Manual online
28
KX-FL423RU-B / KX-FL423RU-W
Note 1 - Standard facsimile units conforming to T.2 must have the following capability: Index of cooperation (IOC)=264.
Note 2 - Standard facsimile units conforming to T.3 must have the following capability: Index of cooperation (IOC)=264.
Note 3 - Standard facsimile units conforming to T.4 must have the following capability: Paper length=297 mm.
Note 2 - Standard facsimile units conforming to T.3 must have the following capability: Index of cooperation (IOC)=264.
Note 3 - Standard facsimile units conforming to T.4 must have the following capability: Paper length=297 mm.
21, 22, 23
(0, 0, 0)
(0, 0, 1)
(0, 1, 0)
(1, 0, 0)
(0, 1, 1)
(1, 1, 0)
(1, 0, 1)
(1, 1, 1)
(0, 0, 0)
(0, 0, 1)
(0, 1, 0)
(1, 0, 0)
(0, 1, 1)
(1, 1, 0)
(1, 0, 1)
(1, 1, 1)
Minimum scan line time capability of the receiver
20 ms at 3.85 l/mm: T
20 ms at 3.85 l/mm: T
7.7
= T
3.85
40 ms at 3.85 l/mm: T
7.7
= T
3.85
10 ms at 3.85 l/mm: T
7.7
= T
3.85
5 ms at 3.85 l/mm: T
7.7
= T
3.85
10 ms at 3.85 l/mm: T
7.7
= 1/2 T
3.85
20 ms at 3.85 l/mm: T
7.7
= 1/2 T
3.85
40 ms at 3.85 l/mm: T
7.7
= 1/2 T
3.85
0 ms at 3.85 l/mm: T
7.7
= T
3.85
Minimum scan line time
20 ms
40 ms
10 ms
5 ms
20 ms
40 ms
10 ms
5 ms
0 ms
24
Extend field
Extend field
25
2400 bit/s handshaking
2400 bit/s handshaking
26
Uncompressed mode
Uncompressed mode
27
Error correction mode
Error correction mode
28
Set to “0”.
Frame size 0 = 256 octets 1 = 64 octets
29
Error limiting mode
Error limiting mode
30
Reserved for G4 capability on PSTN
Reserved for G4 capability on PSTN
31
T.6 coding capability
T.6 coding enabled
32
Extend field
Extend field
33
(0)
(1)
(0)
(1)
Validity of bits 17, 18
Bits 17, 18 are valid
Bits 17, 18 are invalid
Bits 17, 18 are valid
Bits 17, 18 are invalid
Recording width
Recording width indicated by bits 17, 18
Recording width indicated by this field bit information
Recording width indicated by bits 17, 18
Recording width indicated by this field bit information
34
Recording width capability 1216 picture elements along
scan line length of 151 ± mm 1%
scan line length of 151 ± mm 1%
Middle 1216 elements of 1728 picture elements
35
Recording width capability 864 picture elements along scan
line length of 107 ± mm 1%
line length of 107 ± mm 1%
Middle 864 elements of 1728 picture elements
36
Recording width capability 1728 picture elements along
scan line length of 151 ± mm 1%
scan line length of 151 ± mm 1%
Invalid
37
Recording width capability 1728 picture elements along
scan line length of 107 ± mm 1%
scan line length of 107 ± mm 1%
Invalid
38
Reserved for future recording width capability.
39
Reserved for future recording width capability.
40
Extend field
Extend field
41
R8
×15.4 lines/mm
R8
×15.4 lines/mm
42
300
×300 pels/25.4 mm
300
×300 pels/25.4 mm
43
R16
×15.4 lines/mm and/or 400×400 pels/25.4 mm
R16
×15.4 lines/mm and/or 400×400 pels/25.4 mm
44
Inch based resolution preferred
Resolution type selection
“0”: neuritic based resolution
“1”: inch based resolution
“0”: neuritic based resolution
“1”: inch based resolution
45
Metric based resolution preferred
Don’t care
46
Minimum scan line time capability for higher resolutions
“0”: T
“0”: T
15.4
= T
7.7
“1”: T
15.4
= 1/2T
7.7
Don’t care
47
Selective Polling capability
Set to “0”.
48
Extend field
Extend field
Signal
Identification Signal Format
Function
Training 1
———————
A fixed pattern is transmitted to the receiving side at a speed (2400
to 14400 bps) designated by DCS, and the receiving side optimizes
the automatic equalizer, etc., according to this signal.
to 14400 bps) designated by DCS, and the receiving side optimizes
the automatic equalizer, etc., according to this signal.
Bit No.
DIS/DTC
DCS
Click on the first or last page to see other KX-FL423RU service manuals if exist.