KX-FL423RU - Panasonic Fax Service Manual (repair manual). Page 25

25

4. Concerning Transmission Time

Transmission Time   =    Control Time  +    Image Transmission Time     +    Hold Time

Transmission time consists of the following.
Control time:

This is time at the start of transmission when the functions at the sending and receiving sides are confirmed, the transmis-
sion mode is established, and transmission and reception are synchronized.

This is the time required for the transmission of document contents (image data). In general, this time is recorded  in  the
catalog, etc.

This is the time required after the document contents have been sent to confirm that the document was actually sent, and
to check for telephone reservations and/or the existence of continuous transmission.

5. Facsimile Standards

 

Item

Telephone Network Facsimile

G3 Machine

Connection Control Mode

Telephone Network Signal Mode

Terminal Control Mode

T. 30 Binary

Facsimile Signal Format

Digital

Modulation Mode

PSK (V. 27 ter) or QAM (V. 29) or TCM (V17,V34)

Transmission Speed

300 bps (Control Signal)
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
14400, 12000, 9600, 7200, 4800, 2400 bps (FAX Signal)

Redundancy Compression
 
Process
 
(Coding Mode)

1 dimension: MH Mode
 
2 dimension: MR Mode (K=2.4)
 
3 dimension: MMR Mode

Resolution

Main Scan: 8 pel/mm
 
Sub Scan: 3.85, 7.7l/mm

Line Synchronization Signal

EOL Signal

1 Line Transmission Time
 
[ms/line]

Depends on the degree of data reduction.
 
Minimum Value: 10, 20
 
Can be recognized in 40ms.