Read Panasonic DMC-LC20PP / DMC-LC20PM / DMC-LC20E / DMC-LC20B / DMC-LC20A / DMC-LC20EN / DMC-LC20KR (serv.man2) Service Manual online
6 SERVICE NOTES
6.1. WHEN REPLACING THE MAIN C.B.A.
After replacing the MAIN C.B.A. be sure to write the data in Flash ROM with TATSUJIN KIT in accordance with the instruction given
by TATSUJIN KIT.
by TATSUJIN KIT.
(There are two kinds of the Flash ROM data, one is NTSC version and the other one is PAL version.)
Then, adjust and/or confirm that each adjustment value or performance to be within specification.
6.2. SERVICE POSITION
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
VFK1582A2225
CON8 (MAIN) - CON1(CCD)
22PIN 0.5 B to B
2
VFK1461
CON2 (MAIN) - SW C.B.A.
20PIN 0.5 FFC
3
VFK1367
CON3 (MAIN) - CON14(SUB C.B.A.)
50PIN 0.5 FFC
4
VFK1284
CON9 (MAIN) - LCD UNIT
24PIN 0.5 FFC
5
VFK1464
CON10 (MAIN) - AF SENSOR
7PIN 0.5 FFC
6
VFK1292
CON11 (MAIN) - ZOOM MOTOR
9PIN 0.5 FFC
7
VFK1582A0425
CON13 (MAIN) - IRIS MOTOR
4PIN 0.5 FFC
CAUTION
1. Be sure to discharge the capacitor for strobe, which is connected with SUB C.B.A.
(Refer to “HOW TO DISCHARGE THE CHARGING CAPACITOR FOR STROBE”.)
7
DMC-LC20PP / DMC-LC20PM / DMC-LC20E / DMC-LC20B / DMC-LC20A / DMC-LC20EN / DMC-LC20KR
Click on the first or last page to see other DMC-LC20PP / DMC-LC20PM / DMC-LC20E / DMC-LC20B / DMC-LC20A / DMC-LC20EN / DMC-LC20KR (serv.man2) service manuals if exist.