Read Panasonic DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN Service Manual online
4
1.4.
How to Discharge the Capacitor on Flash Top P.C.B.
CAUTION:
1. Be sure to discharge the capacitor on FLASH TOP P.C.B..
2. Be careful of the high voltage circuit on FLASH TOP P.C.B. when servicing.
2. Be careful of the high voltage circuit on FLASH TOP P.C.B. when servicing.
[Discharging Procedure]
1. Refer to the disassemble procedure and remove the necessary parts/unit.
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k
2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1k
Ω /5W).
(an equivalent type of resistor may be used.)
3. Place a resistor between both terminals of capacitor on the FLASH TOP P.C.B. for approx. 5 seconds.
4. After discharging, confirm that the capacitor voltage is lower than 10V using a voltmeter.
4. After discharging, confirm that the capacitor voltage is lower than 10V using a voltmeter.
Fig. F1
Click on the first or last page to see other DMC-F2P / DMC-F2PC / DMC-F2PR / DMC-F2PU / DMC-F2EB / DMC-F2EE / DMC-F2EF / DMC-F2EG / DMC-F2EP / DMC-F2GC / DMC-F2GF / DMC-F2GN service manuals if exist.