Read Panasonic WV-CU550B Service Manual Simplified online
– 1 –
1
2
3
4
5
6
7
8
9
MON
CAM
ESC
SET
0
ACK
RESET
BACK
SEQ
FORWARD
SEQ
ALT
DEC
–1CAM
INC
+1CAM STOP
SLOW
1
2
AUX
CLOSE
OPEN
IRIS
PRESET
FOCUS
NEAR
ZOOM
TELE
FAR
WIDE
System Controller WV-CU
550
LEFT
RIGHT
UP
DOWN
ALARM
BUSY
F3
F4
F2
F1
B
AF
CONTROLLER
ON
OFF
IN
OUT
TERM
ON
OFF
DATA
0 1
2
3
45
6
7
8
9
CONTROLLER
UNIT NO.
1-8
MODE
8
Front View
8
Rear View
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Q
Alarm Indicator (ALARM)
Blinks to indicate that an alarm condition exists.
To turn the indicator off, press the ACK RESET button.
To turn the indicator off, press the ACK RESET button.
W
Busy Indicator (BUSY)
Lights up when you attempt to control a monitor or a
camera that is already used by a higher priority operator,
or when the higher priority operator selects the monitor
or camera you are currently operating.
Operations from the System Controller are disabled until
this indicator goes off.
camera that is already used by a higher priority operator,
or when the higher priority operator selects the monitor
or camera you are currently operating.
Operations from the System Controller are disabled until
this indicator goes off.
E
Function Buttons (F1/F2/F3/F4)
Select functions displayed on the LCD (Liquid Crystal
Display) display.
Display) display.
R
LCD (Liquid Crystal Display)
Displays function menus, numeric input, and system sta-
tus.
tus.
T
Direction Buttons (
A
,
B
,
D
,
C
)
Select a function menu for display on the LCD display.
Y
Joystick Controller (UP/DOWN/LEFT/RIGHT)
The joystick is used to manually operate the Pan/Tilt
Head, or move the cursor in the Matrix Switcher’s Setup
Menu on the active monitor screen.
Head, or move the cursor in the Matrix Switcher’s Setup
Menu on the active monitor screen.
U
Iris Control Buttons (IRIS CLOSE, OPEN)
Close or open the lens iris of cameras equipped with the
specified lens.
When these buttons are pressed at the same time for 3
seconds or more, the lens iris is reset to the factory
default setting.
specified lens.
When these buttons are pressed at the same time for 3
seconds or more, the lens iris is reset to the factory
default setting.
I
Focus Control (FOCUS NEAR/FAR)
Adjust the lens focus of cameras equipped with the
specified lens.
specified lens.
O
Zoom Control (ZOOM TELE/WIDE)
This control is used for zooming cameras equipped with
the specified lens.
the specified lens.
P
Preset Button (PRESET)
Auto Focus Button (AF)
Auto Focus Button (AF)
PRESET: This button, in combination with the Numeric
keys, is used to move the selected camera to a pre-
set position in a system equipped with the specified
cameras.
set position in a system equipped with the specified
cameras.
AF: Pressing this button will automatically set the lens
focus of a specified camera such as the WV-CS854.
Click on the first or last page to see other WV-CU550B service manuals if exist.