Read Panasonic WV-CS850 / WV-CS854E Service Manual online
– 10 –
9.1. R White Balance 3200K Manual Offset
Adjustment
Test Point:
Video Output Connector
8
Set the Gain Control of the Vectorscope to maximum.
8
Aim the Camera at the White Chart or White Paper.
8
Adjust data with the ARROW keys so that the vector
positions at the center of the Vectorscope as shown in Fig.
4-9.
Fig. 4-9
8
Press the ENTER key for the next adjustment.
9.2.
B White Balance 3200K Manual Offset
Adjustment
Test Point:
Video Output Connector
8
Aim the Camera at the White Chart or White Paper.
8
Adjust data with the ARROW keys so that the vector
positions at the center of the Vectorscope as shown in Fig.
4-9.
8
Repeat adjust from 9.1. and 9.2. until the vector positions
at the center of the Vectorscope.
8
Press the ENTER key for the next adjustment.
10.1. R White Balance 6500K ATW Limit
Adjustment
Test Point:
Video Output Connector
8
Aim the Camera at the White Chart or White Paper.
8
Change the Colour Temperature from 3,200 °K to 6,500
°K.
8
Adjust data with the ARROW keys so that the vector
positions at shift by 10 % to the Cyan side of the
Vectorscope as shown in Fig. 4-10.
Fig. 4-10
8
Press the ENTER key for the next adjustment.
10.2. B White Balance 6500K ATW Limit
Adjustment
Test Point:
Video Output Connector
8
Aim the Camera at the White Chart or White Paper.
8
Keep the Colour Temperature to 6,500 °K.
8
Adjust data with the ARROW keys so that the vector
positions at shift by 10 % to the Cyan side of the
Vectorscope as shown in Fig. 4-10.
8
Repeat adjust from 10.1. and 10.2. until the vector
positions at
shift by 10 % to the Cyan side of the
Vectorscope.
8
Press the ENTER key for the next adjustment.
11.1. 3200K R_Gain Adjustment
Test Point:
Video Output Connector
8
Aim the Camera at the Colour Chip Chart.
8
Set the Gain Control of the Vectorscope to the Normal
position.
8
Return the Colour Temperature from 6,500 °K to 3,200 °K.
8
Adjust data with the ARROW keys so that the Red gain
becomes 220 ± 5 % (Burst level = 100%).
8
Press the ENTER key for the next adjustment.
11.2. 3200K B_Gain Adjustment
Test Point:
Video Output Connector
8
Adjust data with the ARROW keys so that the Yellow gain
becomes 100 ± 5 % (Burst level = 100%).
8
Press the ENTER key for the next adjustment.
cy
g
M
G
Y
L
yl
B
b
G
C
Y
dG
10
°
0
°
10
°
dø
100%
75%
R
V
U
mg
r
20%
20%
dG
Shifts approx. 10%.
cy
g
M
G
Y
L
yl
B
b
G
C
Y
dG
10
°
0
°
10
°
dø
100%
75%
R
V
U
mg
r
20%
20%
dG
Positions at center.
Click on the first or last page to see other WV-CS850 / WV-CS854E service manuals if exist.