Read Panasonic WV-CP460 / WV-CP464 Service Manual online
<WV-CP460>
<WV-CP464>
q
e
w
r
t
y
o
u
!0
!1
i
!2
!3
!2
!5
!3
!4
Super
Dynamic
WV-
CP460
Hi-Z G/L 75
Ω
VIDEO OUT
220-240 V ~ 50Hz
GEN-LOCK
AC 24V
IN
DC 12V
IN
1
2
VIDEO OUT
GND
GEN-LOCK
WV-CP460 Series
– 1 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Slide the panel to the left until it locks.
q
Auto Iris Lens Connector
This connector is used to connect the auto iris lens with a
4-pin male connector supplied as a standard accessory
(Part No. YFE4191J100).
This connector is used to connect the auto iris lens with a
4-pin male connector supplied as a standard accessory
(Part No. YFE4191J100).
w
Focus-Fixing Screw
e
Flange-back Adjusting Ring
This ring is used to adjust the back focal length or picture
focus. Rotate this ring clockwise for a C-mount lens or
counterclockwise for a CS-mount lens.
This ring is used to adjust the back focal length or picture
focus. Rotate this ring clockwise for a C-mount lens or
counterclockwise for a CS-mount lens.
r
Lens (Option)
t
Camera Mounting Screw Hole
This hole is used to mount the camera onto a mounting
bracket.
This hole is used to mount the camera onto a mounting
bracket.
y
Down Button (
)
This button is used to move the cursor downward. It is
also used to select items in the CAM SET UP menu.
also used to select items in the CAM SET UP menu.
u
Left Button (
)
This button is used to move the cursor to the left. It also
selects the mode and can be used to adjust some levels.
selects the mode and can be used to adjust some levels.
i
Up Button (
)
This button is used to move the cursor upward. It is also
used to select items in the CAM SET UP menu.
used to select items in the CAM SET UP menu.
o
Right Button (
)
This button is used to move the cursor to the right. It also
selects the mode and can be used to adjust some levels.
selects the mode and can be used to adjust some levels.
Caution:
• Connect to 12 V DC (10.8 V-16 V) or 24 V AC (19.5 V-
28 V) class 2 power supply only. Make sure to connect
the grounding lead to the GND terminal when the
power is supplied from a 24 V AC power source.
the grounding lead to the GND terminal when the
power is supplied from a 24 V AC power source.
!0
Set Button (
)
This button is used to activate an item selected in the CAM
SET UP menu.
SET UP menu.
!1
Gen-lock Termination Switch (Hi-Z, G/L 75
Ω
)
Set this switch to Hi-Z when a gen-lock video input signal is
looped through. In all other cases, set this switch to 75
looped through. In all other cases, set this switch to 75
Ω
.
!2
Gen-lock Input Connector (GEN-LOCK)
This connector is used to connect an external system for
synchronization.
This connector is used to connect an external system for
synchronization.
!3
Video Output Connector (VIDEO OUT)
This connector is used to connect the VIDEO IN connector
of the monitor.
This connector is used to connect the VIDEO IN connector
of the monitor.
!4
AC Inlet Socket
This socket is used to connect the power cord (supplied as
a standard accessory).
This socket is used to connect the power cord (supplied as
a standard accessory).
!5
AC/DC Compatible Input Terminal
(DC 12 V IN/AC 24 V IN)
This terminal is for connecting the 12 V DC or 24 V AC
power supply cord.
(DC 12 V IN/AC 24 V IN)
This terminal is for connecting the 12 V DC or 24 V AC
power supply cord.
Click on the first or last page to see other WV-CP460 / WV-CP464 service manuals if exist.