WV-CP240 - Panasonic Video Monitoring Service Manual (repair manual). Page 3

– 1 –

GND

AC  24V  IN

1

2

VIDEO OUT

VIDEO OUT

VIDEO OUT

<WV-CP240>

<WV-CP244E>

<WV-CP242E>

DC 12V  IN

WV–

CP244

CP244

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LL

INT

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

ELC

ALC

SOFT

SHARP

OFF

BLC ON

DC

VIDEO

LOCK

Fixing Screws

Camera Mounting
Screw Holes

Mount Adapter

cs

 c

q

Auto Iris Lens Connector
Supplies power and control signals to an auto iris lens (not
supplied).

w

Flange-back Adjusting Ring
This ring adjusts the back-focal distance or picture focus.
Rotate this ring clockwise for a C-mount lens or counterclock-
wise for a CS-mount lens.

e

r

Mount Adapter
The camera mounting screw hole is for mounting the camera
onto a mounting bracket. The camera is originally designed to
be mounted from the bottom, however, a top-mounting type is
also available. To mount from the top, remove the mount
adapter from the bottom of the camera by removing two fixing
screws. Attach the mount adapter to the top as shown in the
diagram, then mount the camera on the mounting bracket.
Make sure that two original screws are used when mounting
the mount adapter; longer type screws may damage inner
components, too shorter type screws may cause the camera
drop.

t

y

Power Cord (only for WV-CP240)
Connect this power cord to an electrical outlet of 220 V - 240 V
AC 50 Hz.

u

DC 12 V Input Terminal 
[DC 12V IN (only for WV-CP242E)]
This terminal is for connecting the 12 V DC power supply cord.

i

AC 24 V Input Terminal 
[AC 24V IN (only for WV-CP244E)]
This terminal is for connecting the 24 V AC 50 Hz power sup-
ply cord.

o

Synchronization Mode Selector 
[INT, LL (only for WV-CP240 and WV-CP244E)]
Selects the camera synchronization mode as either internal
sync mode (INT) or line-lock mode (LL).
INT: Sets to internal 2:1 interlace.
LL: Sets to Line-lock mode.

!0

Back Light Compensation Mode Selector (BLC ON, OFF)
Lets you select the mode according to the position of the object
and light conditions on the screen.
ON: Select this mode when a strong light such as a spotlight is

in the background.

OFF: Normal picture.

!1

Detail/Aperture Level Selector (SHARP, SOFT)
The detail/aperture level can be selected with this selector. Set
it to the desired position while observing the picture on the mon-
itor.
SHARP: Normal position.
SOFT: Select this position when a Quad System is connected

to this camera.

!2

Automatic Light Control/Electronic Light Control Selector
(ALC, ELC)
Lets you select the mode according to the lens type used.
ALC: Select this mode when an auto iris lens (ALC lens) is

used with this camera.

ELC: Select this mode when a fixed iris lens or manual iris lens

is used with this camera.

!3

Lens Drive Signal Selector (VIDEO, DC)
Lets you select the mode according to the type of auto iris lens
drive signal to be supplied to the lens from the auto iris lens
connector.
VIDEO: Select this mode if you are using a auto iris lens that

requires a video drive signal.

DC: Select this mode if you are using a auto iris lens that

requires a DC drive signal.

!4

Video Output Connector (VIDEO OUT)
This connector is for connecting with the VIDEO IN connector of
the video monitor.
Whenever the multiplexed vertical drive (VD2) signal is supplied
to this connector, the camera synchronization mode is automati-
cally set to Vertical Drive.

Caution:
• Connect to 12 V DC (10.5 V-16 V) or 24 V AC (19.5 V-28 V)

class 2 power supply only. Make sure to connect the grounding
lead to the GND terminal when the power is supplied from a 24
V AC power source.