Read Panasonic WJ-SX550 Service Manual Supplement online
– 56 –
8
The character "!" (reversed Black and White) should be
output from the MONITOR OUT1 Connector to MONI-
TOR OUT4 Connector on the Video Output Board and
displayed on the Video Monitor as shown in Fig. 7-12-4.
Fig. 7-12-4
505 Character Generator Output Release Check
8
Enter the Instruction Code 505 by the 10-key of the WV-
CU550 or Instruction Code 5 by the SW1-3, SW1-4 and
SW6-1.
8
Press the GO key or set the SW6-2 from Off to On.
8
The character "!" (reversed Black and White) should be
deleted on the Video Monitor.
506 Switch Check (Does not auto recovery to Idle
mode)
8
Enter the Instruction Code 506 by the 10-key of the WV-
CU550 or Instruction Code 6 by the SW1-3, SW1-4 and
SW6-1.
8
Press the GO key or set the SW6-2 from Off to On.
8
Set the SW1-3 to On, the description SW1-3 (ON) should
be displayed on the Video Monitor as shown in Fig. 7-12-
5 and the Data "STX SO 0 ETX" is transmitted to the RS-
232C line.
8
Set the SW1-3 to Off, the description SW1-3 (OFF)
should be displayed on the Video Monitor as shown in
Fig. 7-12-5 and the Data "STX SO 1 ETX" is transmitted
to the RS-232C line.
8
Set the SW1-4 to On, the description SW1-4 (ON) should
be displayed on the Video Monitor as shown in Fig. 7-12-
5 and the Data "STX SO 2 ETX" is transmitted to the RS-
232C line.
8
Set the SW1-4 to Off, the description SW1-4 (OFF)
should be displayed on the Video Monitor as shown in
Fig. 7-12-5 and the Data "STX SO 3 ETX" is transmitted
to the RS-232C line.
8
Set the SW6-1 to On, the description SW6-1 (ON) should
be displayed on the Video Monitor as shown in Fig. 7-12-
5 and the Data "STX SO 4 ETX" is transmitted to the RS-
232C line.
8
Set the SW6-1 to Off, the description SW6-1 (OFF)
should be displayed on the Video Monitor as shown in
Fig. 7-12-5 and the Data "STX SO 5 ETX" is transmitted
to the RS-232C line.
8
Set the SW6-2 to On, the description SW6-2 (ON) should
be displayed on the Video Monitor as shown in Fig. 7-12-
5 and the Data "STX SO 6 ETX" is transmitted to the RS-
232C line.
8
Set the SW6-2 to Off, the description SW6-2 (OFF)
should be displayed on the Video Monitor as shown in
Fig. 7-12-5 and the Data "STX SO 7 ETX" is transmitted
to the RS-232C line.
Fig. 7-12-5
8
The relationship between the numbers and descriptions
are shown in Table 7-12-1.
Table 7-12-1
507 Forced Release during check execution
(basically for used without Personal
Computer)
8
Enter the Instruction Code 507 by the 10-key of the WV-
CU550 or Instruction Code 7 by the SW1-3, SW1-4 and
SW6-1.
8
Press the GO key or set the SW6-2 from Off to On.
8
Return to Idle mode from any one of the Check Items is
executed.
508 DPRAM Interface Check
8
Factory use only.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(For Example)
Video Monitor
Video Monitor
Switch Description
Video Monitor
∗
1
0
1
2
3
SW1-3 (ON)
SW1-3 (OFF)
SW1-4 (ON)
SW1-4 (OFF)
Switch Description
4
5
6
7
SW6-1 (ON)
SW6-1 (OFF)
SW6-2 (ON)
SW6-2 (OFF)
∗
1 Switch Description
Click on the first or last page to see other WJ-SX550 service manuals if exist.