Read Panasonic WJ-SX550 Service Manual Supplement online
– 17 –
8
Set the SW2-3 to Off, the LED D6 should be Off and the
Data “STX SC 05 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-4 to On, the LED D7 should be On and the
Data “STX SC 06 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-4 to Off, the LED D7 should be Off and the
Data “STX SC 07 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-5 to On, the LED D8 should be On and the
Data “STX SC 08 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-5 to Off, the LED D8 should be Off and the
Data “STX SC 09 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-6 to On, the LED D9 should be On and the
Data “STX SC 10 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-6 to Off, the LED D9 should be Off and the
Data “STX SC 11 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-7 to On, the LED D10 should be On and the
Data “STX SC 12 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-7 to Off, the LED D10 should be Off and the
Data “STX SC 13 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-8 to On, the LED D11 should be On and the
Data “STX SC 14 ETX” is transmitted to the RS-232C
line.
8
Set the SW2-8 to Off, the LED D11 should be Off and the
Data “STX SC 15 ETX” is transmitted to the RS-232C
line.
8
Execute the 299 Instruction from the Personal Computer
or the 299 Instruction by 10-key or press the ACK RESET
key of the WV-CU550, or set the 0F(H) Instruction by the
SW2 and press the SW3 if the Self Check Function is
done with the WJ-SX550 alone for a return to the Idle
mode.
8
The relationship between the numbers and descriptions
are as shown in the Table 7-3-1.
Table 7-3-1
8
The relationship between the reference number of LEDs
and reference number of switches are as shown in the
Fig. 7-3-2.
Fig. 7-3-2
207 SW3, TAJ, CN11 (JP6) and SW4 (VD/VS)
Check (Does not automatically recover to
Idle mode)
8
Enter the Instruction Code 207 by the 10-key or
Instruction Code 07 by the SW2.
8
Press the GO key or press the SW3.
8
Press the SW3 to On, the LED D11 should be On and the
Data “STX SC 16 ETX” is transmitted to the RS-232C
line.
8
Short the Time Adjust In Connector on the CPU Board,
the LED D10 should be On and the Data “STX SC 17
ETX” is transmitted to the RS-232C line.
8
Short the between pins 1 and 4 of CN11, the LED D9
should be On and the Data “STX SC 18 ETX” is transmit-
ted to the RS-232C line.
8
Short the between pins 2 and 3 of CN11, the LED D8
should be On and the Data “STX SC 19 ETX” is transmit-
ted to the RS-232C line.
8
Set the SW4 to the VD side, the LED D7 should be On
and the Data “STX SC 20 ETX” is transmitted to the RS-
232C line
∗
1
00
01
02
03
04
05
06
07
08
09
10
11
SW2-1(ON)
SW2-1(OFF)
SW2-2(ON)
SW2-2(OFF)
SW2-3(ON)
SW2-3(OFF)
SW2-4(ON)
SW2-4(OFF)
SW2-5(ON)
SW2-5(OFF)
SW2-6(ON)
SW2-6(OFF)
Switch Description
12
13
14
15
16
17
18
19
20
21
SW2-7(ON)
SW2-7(OFF)
SW2-8(ON)
SW2-8(OFF)
SW3
TAJ
JP6(1-4)
JP6(2-3)
VD
VS
D4
D5
D6
D7
D8
D9 D10 D11
SW2-8
SW2-7
SW2-6
SW2-5
SW2-4
SW2-3
SW2-2
SW2-1
SW2-7
SW2-6
SW2-5
SW2-4
SW2-3
SW2-2
SW2-1
Click on the first or last page to see other WJ-SX550 service manuals if exist.