Read Panasonic WJ-HD500 Service Manual online
– 8 –
8
Set the Program Timer to PROG1 by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-8.
8
Press the Set Button (SET), and the PROG1 setting menu
as shown in Fig. 3-9 will appear on the monitor screen.
Fig 3-9
8
Move the cursor to the START time editing area of NO.1
by the Direction Buttons (
A
,
B
,
D
or
C
).
8
Set the time to start the recording to 0:00 by the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Move the cursor to the END time editing area of NO.1 by
the Direction Buttons (
A
or
B
).
8
Set the time to end the recording to 24:00 by the
Increment/Decrement Buttons (+ or –) as shown in Fig 3-9.
8
Move the cursor to the Recording Mode editing area for
Group 2 (G2) by pressing the Direction Buttons (
A
or
B
).
8
Set the Recording Mode to – (disable) by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Set the Recording Mode of Group 3 (G3) and Group 4
(G4) to – (disable) by the same procedure as above.
8
Move the cursor to the Recording Mode editing area for
Group 1 (G1) by pressing the Direction Buttons (
A
or
B
).
8
Set the Recording Mode to M/S by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Press the Set Button (SET), and the M/S setting menu as
shown in Fig. 3-10 will appear on the monitor screen.
Fig 3-10
8
Move the cursor to the REC RATE in the menu by
pressing the Direction Buttons (
D
or
C
).
8
Set the Recording Rate to 15FPS by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-
10.
8
Move the cursor to the PRE PICTURES by pressing the
Direction Buttons (
D
or
C
).
8
Set the number of the pre-recording image to the value
other than 0 by pressing the Increment/Decrement
Buttons (+ or –) as shown in Fig. 3-10.
8
Press the Setup /Escape Button (SET UP/ESC) three
times to return to the WJ-HD500 SETUP menu as shown
in Fig. 3-5.
8
Move the cursor to ALARM SETUP by pressing the
Direction Buttons (
D
or
C
), then press the Set Button
(SET). The ALARM SETUP menu as shown in Fig. 3-11
will appear on the monitor screen.
Fig 3-11
8
Move the cursor to VIDEO LOSS by pressing the
Direction Buttons (
D
or
C
).
8
Select OFF by pressing the Increment/Decrement Buttons
(+ or –) as shown in Fig. 3-11.
8
Move the cursor to VIDEO MOTION DETECTION by
pressing the Direction Buttons (
D
or
C
).
8
Select OFF by pressing the Increment/Decrement Buttons
(+ or –) as shown in Fig. 3-11.
8
Press the Setup/Escape Button (SET UP/ESC) for two
seconds or more to close the setup menu and to return to
the normal screen.
8
Confirm that the Yellow LED of Numeric Button 1 only
lights up.
3-1-1-1 PROG1-NO1-G1 REC SETUP
M/S(EVENT RECORDER MULTI SHOT)
REC MODE
REC RATE 15FPS
QUALITY SUPER FINE
PRE PICTURES 15
POST PICTURES 60
DYNAMIC REC OFF
REC RATE 15FPS
QUALITY SUPER FINE
PRE PICTURES 15
POST PICTURES 60
DYNAMIC REC OFF
6 ALARM SETUP
ALARM TERMINAL SETUP
AUTO RESET OFF
ALARM OUTPUT 2S
ALARM BUZZER 2S
VIDEO LOSS OFF
VIDEO MONITOR DETECTION OFF
VMD AREA SETUP
AUTO RESET OFF
ALARM OUTPUT 2S
ALARM BUZZER 2S
VIDEO LOSS OFF
VIDEO MONITOR DETECTION OFF
VMD AREA SETUP
ALARM MODE MULTI OUTPUT SPOT
SPOT OUTPUT SPOT
SPOT OUTPUT SPOT
3-1 PROG1(WITHOUT AUDIO)
NO START END G1 G2 G3 G4
1 0:00 24:00 M/S - - -
RATE 7.5 7.5 1 10
2 -:-- -:-- M/S - O/S O/S
RATE 10 5 1
3 -:-- -:-- M/S M/S M/S M/S
RATE 5 2 2 5
4 -:-- -:-- O/S M/S - M/S
RATE 15 10 10
1 0:00 24:00 M/S - - -
RATE 7.5 7.5 1 10
2 -:-- -:-- M/S - O/S O/S
RATE 10 5 1
3 -:-- -:-- M/S M/S M/S M/S
RATE 5 2 2 5
4 -:-- -:-- O/S M/S - M/S
RATE 15 10 10
SET TOTAL REC RATE ON EACH TABLE
G1+G2+G3+G4= UNDER 30FPS
G1+G2+G3+G4= UNDER 30FPS
Click on the first or last page to see other WJ-HD500 service manuals if exist.