Read Panasonic WJ-HD500 Service Manual online
– 6 –
Fig 2-4
8
Connect the Extension Cable
A
between CN403 on the
Main Board and CN403 on the Front Board.
8
Connect the Extension Cable
B
between CN501 on the
Analog Board and CN601 on the Motion Detector Board.
8
Connect the Extension Cable
B
between CN502 on the
Analog Board and CN101 on the Motion Detector Board.
3. Connection and Setting Up for
Adjustment
3.1. Connection
8
Fig. 3-1 shows the connecting diagram for adjustment of
the WJ-HD500.
Fig 3-1
8
Connect the Underscanned Colour Video Monitor through
the Waveform Monitor to the Multiscreen Output
Connector or Spot Output Connector on the Rear Panel of
the WJ-HD500.
8
Terminate the input terminal of the Underscanned Colour
Video Monitor with 75
Ω
.
8
Connect the Video Signal Generator to the Video Input
Connector on the Rear Panel of the WJ-HD500.
8
Connect the probe of the Oscilloscope, the Frequency
Counter and the Digital Voltmeter at the desired Test Point
in each adjustment step.
3.2. Setting Up
8
Turn on the power.
8
Press the Setup/Escape Button (SET UP/ESC) for two
seconds or more, and the WJ-HD500 SETUP menu as
shown in Fig. 3-2 will appear on the monitor screen.
Fig 3-2
8
Move the cursor to SYSTEM SETUP by pressing the
Direction Buttons (
D
or
C
), then press the Set Button
(SET). The SYSTEM SETUP menu as shown in Fig. 3-3
will appear on the monitor screen.
Fig 3-3
8
Move the cursor to USER DEFINED SETUP by pressing
the Direction Buttons (
D
or
C
).
8
Select SAVE by pressing the Increment/Decrement
Buttons (+ or –), then press the Set Button (SET). The
USER DEFINED SETUP menu as shown in Fig. 3-4 will
appear on the monitor screen.
VIDEO IN
MULTISCREEN
OUT
OUT
SPOT
OUT
WJ-HD500
Video Signal
Generator
Generator
Waveform
Monitor
Monitor
Underscanned
Colour Video Monitor
Colour Video Monitor
75
Ω
WJ-HD500 SETUP *.**
TIMER OFF
REC SETUP
COMMON SETUP
*MANUAL WITHOUT AUDIO
REC SETUP
COMMON SETUP
*MANUAL WITHOUT AUDIO
*TIMER WITHOUT AUDIO
*EMERGENCY WITHOUT AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
LANGUAGE ENGLISH
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
LANGUAGE ENGLISH
9 SYSTEM SETUP
CLOCK JAN 1.00 0:00
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL *****
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL *****
OPERATION *****
BUZZER ON
USER DEFINED SETUP *LOAD
USER DEFINED SETUP *LOAD
DISK MANAGEMENT
ERROR REPORT
SYSTEM INFORMATION
SYSTEM INFORMATION
Remove three screws.
Main Board
Motion Detector
Board
Board
Analog Board
Click on the first or last page to see other WJ-HD500 service manuals if exist.