Read Panasonic WJ-HD200 Service Manual online
Audio Output Front Panel :
–10 dB 600
Ω
unbalanced, RCA standard jack (x1)
Spot Monitor Output :
1.0 V[p-p]/75
Ω
Composite video signal (x1)
Multi-screen Monitor Output :
1.0 V[p-p]/75
Ω
Composite video signal (x1)
Control Port
Alarm/Remote Port :
25-pin Full Pitch D-sub connector (x1)
Alarm Input 1-8, Alarm Reset Input, EXT REC Input, Time Adjust Input, Sequence
Input: Low-active, Non-voltage N.O. Contact,
Alarm Input 1-8, Alarm Reset Input, EXT REC Input, Time Adjust Input, Sequence
Input: Low-active, Non-voltage N.O. Contact,
≥
100 ms
Alarm Output 1, Alarm Recovery Output 1, Disk End Status Output, Time Adjust Output,
Warning Output, REC Status Output, Play Status Output,
Sequence Output: Low-active, Open-collector, 24 VDC 100 mA max.
Alarm Output 2: High-active, 12 V 4.7 k
Warning Output, REC Status Output, Play Status Output,
Sequence Output: Low-active, Open-collector, 24 VDC 100 mA max.
Alarm Output 2: High-active, 12 V 4.7 k
Ω
Alarm Recovery Output 2: High-active, 12 VDC 220
Ω
RS-485 (PS
•
Data) :
6-conductor modular jack (RJ-11)
RS-232C :
9-pin Full Pitch D-sub connector
10/100BASE-TX Port :
10Base-T and 100Base-TX, 8-conductor modular jack (RJ-45)
Protocol Installed: TCP/IP, HTTP, FTP, SMTP, SNMP, DNS, DDNS
Security: Password-protected
Protocol Installed: TCP/IP, HTTP, FTP, SMTP, SNMP, DNS, DDNS
Security: Password-protected
Hard Disk Drive
Built-in :
120 GB (x1)
Extension :
Optional 1 unit, available using built-in bracket
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
Specifications are subject to change without notice.
STANDARD ACCESSORIES
Rack Mounting Bracket ............................................................... 2 pcs.
Screw for Rack Mounting Bracket (M3x10) ................................. 6 pcs.
Absorber ...................................................................................... 4 pcs.
Sleeve .......................................................................................... 4 pcs.
Hard Disk Fixing Screw ............................................................... 4 pcs.
Earth Lug ..................................................................................... 1 pc. for PAL
Screw for Rack Mounting Bracket (M3x10) ................................. 6 pcs.
Absorber ...................................................................................... 4 pcs.
Sleeve .......................................................................................... 4 pcs.
Hard Disk Fixing Screw ............................................................... 4 pcs.
Earth Lug ..................................................................................... 1 pc. for PAL
Click on the first or last page to see other WJ-HD200 service manuals if exist.