Read Panasonic WJ-HD100 Service Manual online
– 1 –
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■
Front View
OPERATE
TIMER
HDD
ALARM
SUSPEND
DAYLIGHT
SAVINGS
FULL
LOCK
MEMORY CARD
DISPLAY SELECT
STOP
PLAY
REC
PUSH– PAUSE
SET
ALARM SEARCH
STEP
REW/FF
PLAY MODE SELECT
/
/
/
/
SETUP/ESC
q
w e
r
t y u
i
o
!0 !1 !2 !3 !4
!5 !6 !7
!8
LCD CONTRAST
Digital Disk Recorder WJ-HD
q
Operate Indicator [OPERATE]
Lights while the power switch on the rear is turned on.
w
Timer Record Reservation Indicator [TIMER]
Lights when a reservation is made for internal timer
recording.
recording.
e
Alarm Suspension Indicator
[ALARM SUSPEND]
[ALARM SUSPEND]
Lights when an alarm is activated while alarm suspen-
sion is selected. The alarm will be logged in the event
history, but recording is suspended and the buzzer will
not sound.
sion is selected. The alarm will be logged in the event
history, but recording is suspended and the buzzer will
not sound.
r
Summer Time Button [SUMMER TIME]
Press the recessed button with a pin to advance the
internal clock by one hour to summer time, or to set it
back to normal time. While the clock is on summer time,
an asterisk * appears in the time and date display on the
LCD and on the video monitor.
internal clock by one hour to summer time, or to set it
back to normal time. While the clock is on summer time,
an asterisk * appears in the time and date display on the
LCD and on the video monitor.
t
HDD Access Indicator [HDD]
Lights while the disk is being accessed.
y
Full Indicator [FULL]
Blinks when the remaining disk capacity reaches the
preset value, and lights when the disk is full.
preset value, and lights when the disk is full.
u
Lock Indicator [LOCK]
Lights when buttons and JogDial on the front panel are
disabled.
disabled.
i
Memory Card Slot [MEMORY CARD]
Open the lid to insert the CompactFlash card into the
slot or to remove it from the slot. The card is used to
store still pictures for browsing through them on a per-
sonal computer.
slot or to remove it from the slot. The card is used to
store still pictures for browsing through them on a per-
sonal computer.
o
LCD
Displays setup parameters while working with menus, or
the operating status while recording or playing back.
the operating status while recording or playing back.
!0
LCD Button [DISPLAY SELECT]
There are five positions to press; up, down, left, right
and centre. Press the appropriate positions to select a
parameter on the LCD.
and centre. Press the appropriate positions to select a
parameter on the LCD.
!1
LCD Contrast Control [LCD CONTRAST]
Adjust the LCD contrast by rotating the control knob with
a small screw driver.
a small screw driver.
!2
Stop and Setup/ Escape Button
[
[
■
STOP] [SETUP/ESC]
Pressing this button in any mode other than menu setup
stops recording or playback.
Holding down this button for 2 seconds calls up setup
menus or escapes from the setup.
Press this button to go back one step to the previous
selection in the setup menu.
stops recording or playback.
Holding down this button for 2 seconds calls up setup
menus or escapes from the setup.
Press this button to go back one step to the previous
selection in the setup menu.
!3
Play Button [
5
PLAY]
Press this button to start playback. The LED lights while
playing back, and blinks while pausing or searching.
playing back, and blinks while pausing or searching.
!4
Recording Button [
●
REC]
Press this button to start recording. The LED lights while
recording, and blinks while alarm recording.
recording, and blinks while alarm recording.
!5
Alarm Search Button [ALARM SEARCH]
Press this button to search for a desired record in the
alarm log. The LED lights in the alarm search mode.
alarm log. The LED lights in the alarm search mode.
!6
Step and Down Button [STEP
A
❚❚
/
❚❚B
] [
C
]
Press this button to start playing back still pictures field
by field. The LED lights in the step playback mode.
Press this button to move the cursor downward in a
setup menu on the monitor.
by field. The LED lights in the step playback mode.
Press this button to move the cursor downward in a
setup menu on the monitor.
!5
to
!7
are PLAY MODE SELECT buttons that also specify
the JogDial performance in the selected play mode.
Click on the first or last page to see other WJ-HD100 service manuals if exist.