BB-HCM705CE - Panasonic Video Monitoring Service Manual (repair manual). Page 14

14

• Image compression (JPEG/MPEG-4/H.264 encode) function, memory control unit (MCU), ETHERNET MAC, and SD card con-

troller are built into IC101.

• Picture data input from the camera block is captured in SDRAM (1).
• Captured image data is input to the ZOM block, where the scaling of the image size is performed, (an image size of 640

×480,

320

× 240, or 192×144 is generated from the one with the size of 1280×960, or an image size of 640×480, 320×240 or 192×144

from the one with the size of 640

×480), and is stored in SDRAM again (2).

• The scaled image data is input to the JPEG/MPEG-4/H.264 encode section of IC101, and the image is compressed. The com-

pressed image data is stored in SDRAM again (3).

• After CPU processed the compressed image data for a communication protocol, the data is forwarded to the network via ETH-

ERNET MAC and ETHERNET PHY(4). And the image data of post-compression is processed for a file and is recorded on the
SD card (5).