Read Panasonic SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP Service Manual online
17
7 Self Diagnostic and Doctor Mode Setting
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
7.1.
Self Diagnostic Mode
Here is the procedures to enter into Self Diagnostic Mode.
Step 1 : Turn on the unit.
Step 2 : Select CD mode.
Step 1 : Turn on the unit.
Step 2 : Select CD mode.
Step 3 : Press and hold [Q] button for 2 seconds follow by [
] on the unit.
Step 4 : The display show as follow.
To exit the Self Diagnostic Mode
Use either one of the following methods to cancel the Self Diagnostic Mode.
• Press the power button on the main unit or using the remote control.
• Unplug the AC cord.
• Unplug the AC cord.
7.1.1.
Self Diagnostic Table
Self Diagnostic Mode
To enter into self diagnostic
checking
checking
Item
FL display
Key operation
Mode name
Description
Error code information
Delete Error code
Example:
System will perform a check on
any unusual/error code from the
memory
any unusual/error code from the
memory
To clear the stored in memory
(EEPROM IC)
(EEPROM IC)
Step 1 : Select CD mode
(Ensure no disc is inserted).
Step 2 : Press and hold [ ] follow by
[ ] on main unit for 2
second
.
Step 1 : In self diagnostic mode,
Press [STOP] on main unit.
To exit, press [
TA
] on main
unit or remote control.
Step 1 : In self diagnostic mode,
Press [0] on remote control.
To exit, press [
TA
] on main
unit or remote control.
Click on the first or last page to see other SA-PM500EG / SA-PM500EF / SA-PM500EP / SC-PM500EP service manuals if exist.