CW-XC51LE - Panasonic Air Conditioner Service Manual (repair manual). Page 16

Always use the rated voltage and with specific air conditioner
circuit.

Some instalation may require installation of  a short circuit
breaker or grounding.

A 10 ampere time delay fuse or circuit breaker is required.

Nominal cross sectional area of power supply wire must be 3
core x 2.5mm

2

 or above.

The power supply must be from an independent circuit.

All electrical instalation must be made in addordance with
local wiring and safety regulations wherever applicable.
Please contact  your dealer concerning instalation
requirements.

1)
2)

Remove Air Filter.
Remove Front Grille

.

Loosen the screws at the right, left, and centre of the grille.

Press the sides of the cabinet firmly and at the same time.
Pull the corners of the grille forward to unhook the tabs.

Slide the grille upward to free the two tabs at the top of the
grille from slots at the top of the cabinet.

Select an instalation location that can support the weight of the
air conditioner and one that will not cause increased operating
noise and vibration.
Ensure that airflow and noise from the rear side of the unit
(outdoors) when installed do not cause inconvenience to
neigbouring resident.

Obstacles placed in front of the air outlet on the rear side of the
unit ( outdoors), or covers placed over it, cause excessive noise
and a deterioration in performance.

When repositioning the air conditioner due to renovations, or
when transferring to a different location, the removal and
reinstallation of the unit requires an additional service charge.
Please consult your dealer before moving.

- 16 -