Read Panasonic CW-XC51LE Service Manual online
Touch Control Panel Remote Control Display
JET MODE
JET MODE
•
Press JET MODE.
(1) To cool down room temperature at faster speed
compare to normal operation.
compare to normal operation.
hr
o
C
Note : Recommended for cooling down room tempera-
ture at faster speed compare to normal operation.
When Jet Mode button is pressed, target temperature
shifted -3
ture at faster speed compare to normal operation.
When Jet Mode button is pressed, target temperature
shifted -3
o
C from previous setting temperature.Jet
Mode operation will override your current fan speed,
setting it to “HIGH”Compressor stops when the room
temperature reaches the target temperature. It turns on
again when the room temperature rises. When power
failure occursor timer off activates, the jet mode setting
is cancelled. Once power resume, reset the jet mode
setting.
setting it to “HIGH”Compressor stops when the room
temperature reaches the target temperature. It turns on
again when the room temperature rises. When power
failure occursor timer off activates, the jet mode setting
is cancelled. Once power resume, reset the jet mode
setting.
8.3.5 Jet Mode Operation.
•
To cancel this operation, press once more.
8.3.6 Setting Delay Stop Timer.
8.3.6.1 Timer Details.
Note : The last timer setting will be memorized and will appear on the dispaly the next time you operate the unit with
the timer function.
the timer function.
•
The timer is for delay stop only.
•
The unit will turn off automatically according to your specified seting.
•
Timer duration can be set from a minimum of 1 hour to a maximum of 12 hours.
•
When the power failure occurs, the timer setting is cancelled. Once power is resumed, timer is reset.
Touch Control Panel Remote Control Display
TEMP/TIMER
TEMP/TIMER
•
The SET/CANCEL indicator light will blink, indicating
an entry is required.
(1) Press the TIMER button.
Note : The hour reading will change back to the set
temperature reading after 10 seconds (You can also
revert to temperature setting immediately by pressing
the TEMP/TIMER “Upward” or “Downward” buttons
again).
temperature reading after 10 seconds (You can also
revert to temperature setting immediately by pressing
the TEMP/TIMER “Upward” or “Downward” buttons
again).
TEMP/TIMER
TEMP/TIMER
TIMER
TIMER
SET/
CANCEL
SET/CANCEL
o SET
hr
o
C
hr
o
C
hr
o
C
hr
o
C
•
Press “Upward” or “Downward” button until the
preferred hour of operation is reached.
(1) Press the TEMP/TIMER “Upward” or “Downward”
button.
button.
•
At this time, the SET/CANCEL indicator light is
steady instead of blinking.
(1) Press the SET/CANCEL button to complite the
setting.
setting.
- 13 -
Click on the first or last page to see other CW-XC51LE service manuals if exist.