Read Panasonic CS-C7DKD / CU-C7DKD / CS-C9DKD / CU-C9DKD / CS-C12DKD / CU-C12DKD Service Manual online
Fig. 4
−
To remove the electronic controller.
−
Remove the particular piece (Fig.4).
−
Release CN-FM connector (Fig.4)
−
Release CN-Sonic connector (Fig.4)
−
Release CN-FB connector (Fig.4)
−
Release CN-ION connector (Fig.4)
•
Remove Control Board cover
Fig. 6
−
Remove the screw on the left side of the unit. (Fig.6)
−
Pull the hook to the left and lift up the evaporator. (Fig.
6)
6)
−
Pull down the Discharge Grille Complete. (Fig.6)
−
Release CN-TH connector (Fig.4)
−
Release CN-STM connector (Fig.4)
−
Release CN-REC/DISP connector (Fig.4)
Fig. 5
−
Press the hook to the right then take out the PCB (Fig.5)
−
Remove Ry-Pwr connector (black and brown) and Ac-
Wht connector from the PCB. (Fig.5)
Wht connector from the PCB. (Fig.5)
Fig. 7
Fig. 8
−
Remove indoor pipe sensor and air intake sensor from
the evaporator. (Fig.7)
the evaporator. (Fig.7)
12.3. Indoor Fan Motor and Cross Flow Fan Removal Procedures
63
CS-C7DKD CU-C7DKD / CS-C9DKD CU-C9DKD / CS-C12DKD CU-C12DKD
Click on the first or last page to see other CS-C7DKD / CU-C7DKD / CS-C9DKD / CU-C9DKD / CS-C12DKD / CU-C12DKD service manuals if exist.