Read LG WP-9526S Service Manual online
2. Remove the Brake Strap from SD Cover.
Remove the Q-spring (Fig. 17).
3.
Remove the screw fastening the door switch and
remove the door switch (Fig. 17).
remove the door switch (Fig. 17).
4.
Q-Spring
Door
Switch
Switch
5.
4-2. Spin Dryer Cover replacement
4-3. Spin Dryer Basket Assembly
replacement
Open the spin dryer cover and separate the brake
wire assembly from the tub, in the direction of
arrow(Fig. 16).
wire assembly from the tub, in the direction of
arrow(Fig. 16).
1.
After removing the back cover, the panel assembly,
proceed as follows:
proceed as follows:
Remove the spin dryer cover by widening between the
hinge hole of the SD Cover Guide and the hinge of the
spin dryer cover and pulling up the spin dryer cover
(Fig. 18).
hinge hole of the SD Cover Guide and the hinge of the
spin dryer cover and pulling up the spin dryer cover
(Fig. 18).
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
the disassembly procedure.
To assemble the spin dryer basket assembly, reverse
the disassembly procedure.
the disassembly procedure.
Unscrew the screw at the left corner in the safety
cover-1.
cover-1.
1.
After removing the back cover, proceed as follows:
Take hold of the front of the safety cover-1.
2.
Pull the safety cover-1 upward.(Fig. 19).
4.
Push the tub by the other hand.
3.
Loosen the fixing bolt of the coupling assembly
fastening the spin shaft (Fig. 20).
fastening the spin shaft (Fig. 20).
5.
Pull out completely the spin basket assembly (Fig. 21).
6.
-8-
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Brake strap asm
Brake wire assembly
Click on the first or last page to see other WP-9526S service manuals if exist.