Read LG WP-1051 Service Manual online
4-4. Spin Motor Replacement
After removing the back cover, opening the spin dryer cover, and removing the spin dryer basket,
proceed as follows:
proceed as follows:
1. Remove the brake wire holder-A in the direction of
the arrow (Fig. 21).
2. Separate the brake wire assembly from the brake
wire holder (Fig.22).
3. Take out the brake wire assembly from the brake
assembly (Fig. 23).
Fig. 21
Fig. 22
Fig. 23
4. Disconnect the lead wires and remove the V-belt.
5. Lay the washing machine on its front side on a
blanket or cardboard.
6. Remove the screws fastening the base and
remove the base from the cabinet (Fig. 24).
7. Remove the screws fastening the vibration damper
assemblies and remove the vibration damper
assemblies (Fig. 25).
assemblies (Fig. 25).
Fig. 25
Fig. 26
Fig. 27
8. Loosen the fixing bolt fastening the motor shaft
and pull up the coupling assembly (Fig. 26).
9. Remove the screws fastening the brake assembly
and remove the brake assembly (Fig. 27).
To assemble the spin motor, reverse the
disassembly procedure.
disassembly procedure.
9
Fig. 24
Brake wire
assembly
assembly
Click on the first or last page to see other WP-1051 service manuals if exist.