Read LG WP-1051 Service Manual online
4-3. Spin Dryer Basket
Assembly Replacement
After removing the back cover, disconnect plunger
valve strap from plunger valve rod, remove panel
assembly, remove SD cover then proceed as follows :
valve strap from plunger valve rod, remove panel
assembly, remove SD cover then proceed as follows :
1. Loosen the fixing bolt of coupling assembly
fastening the spin shaft (Fig. 18).
2. Remove the Q-spring (Fig. 16).
3.Remove the screw fastening the door switch and
remove the door switch (Fig. 16).
4. Remove the spin dryer cover by widening between the
hinge hole of the top cover and the hinge of the spin
dryer cover and pulling up the spin dryer cover (Fig. 17).
dryer cover and pulling up the spin dryer cover (Fig. 17).
2. Remove the screws fastening the top cover and remove
the top cover from the cabinet (Fig. 32).
4. Pull out completely the spin basket assembly (Fig. 20).
To assemble the spin dryer cover assembly, reverse
the disassembly procedure.
the disassembly procedure.
Fig. 17
Fig. 16
Fig. 15
Fig. 18
Fig. 20
4-2. Spin Dryer Cover
Replacement
After removing the back cover and panel assembly
proceed as follows:
proceed as follows:
1. Open the spin dryer cover and separate brake wire
strap from the brake wire assembly (Fig. 15).
8
3. Take hold of the front of the safety cover-1. Insert screw
drive (- Type) into the hook position. Pull the safety
cover-1 upward (Fig. 19).
cover-1 upward (Fig. 19).
Fig. 19
To assemble the spin dryer basket assembly, reverse
the disassembly procedure.
the disassembly procedure.
Click on the first or last page to see other WP-1051 service manuals if exist.