Read LG WP-1051 Service Manual online
After removing the panel assembly, safety cover
assembly, spin dryer basket assembly, spin dryer
cover, washing cover, Q-spring, top cover assembly,
v-belt, door switch and back cover proceed as follows:
assembly, spin dryer basket assembly, spin dryer
cover, washing cover, Q-spring, top cover assembly,
v-belt, door switch and back cover proceed as follows:
1. Lay the front side on a blanket or cardborad.
After removing the back cover and opening the washing
cover, proceed as follows:
cover, proceed as follows:
1. Take out the pulsator cap with "-" type driver.
2. Loosen the pulsator fixing screw and pull up the
pulsator(Fig. 35).
2. Loosen the pulsator fixing and pull up the pulsator
3. Remove waterfall both side by pull up (Fig. 33.A)
4. Remove the screws washing Tub (cabinet) (Fig. 34).
3. Unscrew and remove the screws fastening the
base and remove the base from the cabinet.
4. Lay the washing machine on its front side on a
blanket or some cardboard and remove the base
(Fig. 37).
(Fig. 37).
To assemble the washing Tup(cabinet), reverse the
disassembly procedure.
disassembly procedure.
NOTE
Apply adhesive on hose joint to prevent
water leaks.
water leaks.
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Fig. 33.A
4-7. Washing Tub(Cabinet)
Replacement
Replacement
4-8. Gear Case Assembly
Replacement
Replacement
11
Click on the first or last page to see other WP-1051 service manuals if exist.